That doesnt make sense.
They would ALWAYS be busy.
Disk statistics from statit would help..still.
On Mon, Jan 28, 2013 at 9:17 AM, Fletcher Cocquyt fcocquyt@stanford.eduwrote:
Thanks Scott - upgraded to 3.2 - no issues - this list is such a great resource
A re-allocate may be indicated since I seem to be seeing the same 3 data disks (9,10,23) in the spikes
On Jan 28, 2013, at 8:35 AM, Scott Eno s.eno@me.com wrote:
Shouldn't you be using version 3.2 with DFM 5.1?
On Jan 28, 2013, at 11:18 AM, Fletcher Cocquyt fcocquyt@stanford.edu wrote:
Anyone know why NMC 3.1 (DFM 5.1.0) sometimes reports "No data is currently available…"? and how to fix? Makes it even harder to track issues when the reporting tools fail. thanks
<nodatasata0.jpg>
On Jan 26, 2013, at 5:42 PM, Nicholas Bernstein < nick@nicholasbernstein.com> wrote:
Usually the ps will show you the process that's using the io indirectly, since its also probably using some CPU. Disk scrub, media scrub, reallocate_measure are just a couple things I can think off off the top of my head that are things that could cause read io.
Stats explain should be able to give you more info on that counter. Sorry this don't a more useful response, I'm on my phone and sick in bed. :/
-- Sent from my mobile device
On Jan 26, 2013, at 10:15 AM, Fletcher Cocquyt fcocquyt@stanford.edu wrote:
On Nick's advice I setup a job to log both wafltop and ps -c 1 once per minute - and we had a sustained sata0 disk busy from 5am-7am as reported by NMC. First question I have from wafltop show is - what is the first row (sata0::file i/o) reporting ? What could be the source of these 28907 non-volume specific Read IOs?
Application MB Total MB Read(STD) MB Write(STD) Read IOs(STD)Write IOs(STD) ----------- -------- ------------ ------------- -------------
sata0::file i/o: 5860 5830 30 28907 0sata0:backup:nfsv3: 608 0 608 31 0
I'm just starting to go through the data
aggr status Aggr State Status Options sata0 online raid_dp, aggr nosnap=on, raidsize=12 64-bit aggr2 online raid_dp, aggr nosnap=on, raidsize=19 64-bit aggr1 online raid_dp, aggr root, nosnap=on, raidsize=14 32-bit na04*> df -Ah Aggregate total used avail capacity aggr1 13TB 11TB 1431GB 89% aggr2 19TB 14TB 5305GB 74% sata0 27TB 19TB 8027GB 72%
<sataIOPSJan26.jpeg>
thanks
On Jan 25, 2013, at 5:33 PM, Nicholas Bernstein < nick@nicholasbernstein.com> wrote:
Try doing a 'ps -c 1' or a wafltop show (double check the syntax) while you're getting the spike; those will probably help you narrow down the processes that are using your disks. Both are priv set advanced/diag commands.
Nick
Toasters mailing list Toasters@teaparty.net http://www.teaparty.net/mailman/listinfo/toasters
Toasters mailing list Toasters@teaparty.net http://www.teaparty.net/mailman/listinfo/toasters
