It was our hope that asis would be run on the aggregate level and that would get rid of volume limits altogether. I believe in 7.3, the metadata was moved to the aggregate and that was the first step needed.
It seems to be taking longer than expected for 7.3.1 to get released, lets up its soon.
Stephen Darragh
-----Original Message----- From: owner-toasters@mathworks.com [mailto:owner-toasters@mathworks.com] On Behalf Of Chris Muellner Sent: Wednesday, October 22, 2008 2:15 PM To: Ray Van Dolson; oakley Cc: Clear, John; toasters@mathworks.com Subject: RE: Limits on ASIS enabled FlexVols
The last speculation I heard, which was pretty recently and a conservative one, was the A-SIS limits are still going to be in effect, but the limits are going to be raised and the amount is going to depend on the filer. I heard the smaller filers like the 2020, and possibly the 2050, will see a significant increase in A-SIS volume size of up to 100% and that the higher up the line you go the smaller that percentage of increase gets.
-----Original Message----- From: owner-toasters@mathworks.com [mailto:owner-toasters@mathworks.com] On Behalf Of Ray Van Dolson Sent: Wednesday, October 22, 2008 8:51 AM To: oakley Cc: Clear, John; toasters@mathworks.com Subject: Re: Limits on ASIS enabled FlexVols
On Wed, Oct 22, 2008 at 04:32:35AM -0700, oakley wrote:
Where did you find that the volume limitations went away in 7.3.1? I
was
under the impression that the limits stayed the same in 7.3, but
simply
doubled (ie 500G -> 1TB for 2020) in 7.3.1 .. anyone know which is
true?
- oakley
So far no confirmation from NetApp directly, we've all just "heard" things. I checked with my SE and he also had heard this but advised that they'd heard a lot of things that were supposedly to be included in 7.3.0 that weren't so to take it with a grain of salt.
Anyone from NetApp out there?? :)
---------[ Received Mail Content ]---------- Subject : RE: Limits on ASIS enabled FlexVols Date : Tue, 21 Oct 2008 12:57:19 -0700 From : "Clear, John" <John.Clear@amd.com> To : "Ray Van Dolson" <rvandolson@esri.com>, <toasters@mathworks.com> The ASIS volume size limits go away in 7.3.1, so if you can get by with the current limits for now, you can grow the volum! es later. I don't know if there is a limit to the number of ASIS volumes on a filer. I know there are limits to the number of active ASIS processes, but if you hit that, they just run in sequence like when the snapmirror/snapvault concurrent limits are hit. John -----Original Message----- From: owner-toasters@mathworks.com [mailto:owner-toasters@mathworks.com] On Behalf Of Ray Van Dolson Sent: Tuesday, October 21, 2008 10:30 AM To: toasters@mathworks.com Subject: Limits on ASIS enabled FlexVols Hello fellow toaster-ites! I am evaluating the use of NFS
datastore
on NetApp for use with ESX. Initially the potential benefits of ASIS (dedup) had me just about sold, however, I discovered that with
the
FAS2020 we're looking at there is a 500GB limit to the size of
ASIS
enabled FlexVols. Bummer. I see this limit goes up to 1TB with the FAS2050, so I may need to compare that option as well... Mor! eover, I'm wondering what the limit on the *number* of max-sized AS IS enabled flexvols is per filer? Could I have 15 500GB ASIS enabled flexvols in the FAS2020 above? That wouldn't seem to make logical sense as I understand the limitation is tied to memory.... but
this
might help us get around this size limitation. Thanks in advance. (No sales replies to this please) Ray