10 Oct
2000
10 Oct
'00
12:01 a.m.
The handy config chart at NOW lists stuff by netapp part number, eg X123.
The handy sysconfig command on our filers lists things by... well, not by netapp part number, that's for sure.
Is there some simple way to map between the two? For instance sysconfig says the networking board in slot 5 of our f520 is a
slot 5: Ethernet Controller e5 (Znyx ZX342 (DEC21140))
and the NOW chart says an f720 can support "X1001B" or "X1001C-S" networking boards. Is there somewhere on NOW (or elsewhere) that I can check to see if that "Znyx ZX342 (DEC21140)" *is* a "X1001B" or a "X1001C-S"?