Hello,
I'm having a problem with Async SnapMirror where i have a 500G flexvol on both source and destination. When i initialize it fails at 83G consistently, I've destroyed the volume and rebuilt it several times but the problem reoccurs each time. I've run the source snapmirror logs relating to the failure through the syslog translator and all it really says is that "this is a generic snapmirror error on source", which just isn't very helpful.
Here are the logs from the source: Tue Nov 6 16:04:46 CST [pipeline_3:notice]: snapmirror: Network communication error Tue Nov 6 16:04:46 CST [snapmirror.src.err:error]: SnapMirror source transfer from data to hci2:rcv_data : transfer failed. Tue Nov 6 16:26:36 CST [pipeline_3:notice]: snapmirror: Network communication error Tue Nov 6 16:26:36 CST [snapmirror.src.err:error]: SnapMirror source transfer from data to hci2:rcv_data : transfer failed.
The source 3050a is running DOT 7.0.5 and the destination is running DOT 7.0.6
The volume options are identical as far as i can tell based on the "vol options -v data_vol" command.
The filers sites are connected via a GbE MAN, so bandwidth isn't the problem.
I've checked for errors on the ethernet interfaces on both ends and none of the bad counter are not incrementing.
Has anyone on the list experienced something like this? Or have any troubleshooting advice?
Thx
Mike Partyka