Just adding a few things:
- RSH? Can I run RSH commands?
you can ssh commands, passwordless (once you set up the proper keys) See KB: 1012524 https://kb.netapp.com/support/index?page=content&id=1012542&actp=sea...
- Not clear how to access log file of the cluster....mounting root
share not possible, right? only for vServer..
"event log ...” commands
You can also enable remost access so that you can view the logs from http. This is very useful.
See: https://kb.netapp.com/support/index?page=content&id=1013814
Cheers,
—April
To summarize: To enable the web services for a cluster, use these steps from the KB article mentioned above: 1. Enable the required Web services for the cluster: cluster-1::> vserver services web modify -name spi|ontapi|compat -vserver * -enabled true 2. Create the Web service access service spi for the cluster and assign it the admin role: cluster-1::> vserver services web access create -name spi -role admin -vserver cluster1 3. Create the Web service access service ontapi for the cluster and assign it the admin role: cluster-1::> vserver services web access create -name ontapi -role admin -vserver cluster1 Note: This error will be returned for the admin role, as it is pre-created on cluster create. This error will not be returned if a different role name that is not pre-created is provided. Error: command failed: duplicate entry 4. Create the Web service access service compat for the cluster and assign it the admin role: cluster-1::> vserver services web access create -name compat -role admin -vserver cluster1 5. Identify the cluster-mgmt LIF for the cluster. This will be used for HTTPS access. A node-mgmt LIF can also be used instead of the cluster-mgmt LIF: cluster-1::*> net int show -role cluster-mgmt -fields address (network interface show) vserver lif address -------- ----------- ----------- cluster-1 clus_mgmt 10.98.243.120 6. Identify the names of the nodes in the cluster: cluster-1:> node show -fields node node ---------- cluster1-01 cluster1-02 Cluster1-03 Cluster1-04 4 entries were displayed.
6. Add the login to allow http access. cluster1::> login create -username admin -application http -authmethod password
cluster1::> login show -username admin -application http (security login show) Authentication Acct Vserver UserName Application Method Role Name Locked ----------- ---------------- ----------- -------------- ---------------- ------ cluster1 admin http password admin no
The following URLs will provide access to the log directory on each node: https://<cluster-mgmt-ip>/spi/<node_name>/etc/log/ https://10.98.243.120/spi/node-a/etc/log/ https://10.98.243.120/spi/node-b/etc/log/ https://10.98.243.120/spi/node-c/etc/log/ https://10.98.243.120/spi/node-d/etc/log/
The following URLs will provide access to the directory where the core files are saved on each node: https://<cluster-mgmt-ip>/spi/<node_name>/etc/crash/ https://10.98.243.120/spi/node-a/etc/crash/ https://10.98.243.120/spi/node-b/etc/crash/ https://10.98.243.120/spi/node-c/etc/crash/ https://10.98.243.120/spi/node-d/etc/crash/
On Nov 6, 2013, at 4:54 PM, Scott Miller Scott.Miller@dreamworks.com wrote:
- RSH? Can I run RSH commands?
you can ssh commands, passwordless (once you set up the proper keys)
- No separate exports for qtrees
there is, as of cDOT 8.2.1.
- Not clear how to access log file of the cluster....mounting root
share not possible, right? only for vServer..
"event log ..." commands