The syntax is: filer> vol create volname_here -r raid_size number_of_disks@disk_size
The following command creates a volume name vol2, with a raid size of 10 containing 10 disks using 36GB drives. That would be 9 data and 1 parity disk. filer> vol create vol2 -r 10 10@36
July at Zerowait wrote:
Hello: The filer in question is an inherited box, an F760 with two shelves of 9GB SCSI drives, one shelf of 9GB FC-AL drives all in one RAID and one VOL. The single VOL also contains the root, I think. I've heard that you are supposed to separate SCSI and FC-AL drives into separate RAID groups, but this is how the box came and we can't change it.
Anyway, my task is to add two shelves of 36GB drives to this unit. I know I need to create a separate RAID group for the 36GB drives. In the man pages I see instructions for adding disks to an existing volume and how to create a volume. I don't see anything that tells me how to create a new RAID group. I must be missing something obvious.
Can someone help?
Thank you. July
July A. J. Linett, VP Tech Mktg 302.266.9408 july@zerowait.com
Zerowait: Best Of Breed Internet Core Technologies Web Acceleration ** Data Storage ** Load Balancing www.zerowait.com*www.loadbalancing.net*www.nas-san.com
-- --------------------------------------------------------------- G D Geen mailto:geen@ti.com Texas Instruments Phone : (972)480.7896 System Administrator FAX : (972)480.7676 --------------------------------------------------------------- Life is what happens while you're busy making other plans. -J. Lennon