All cluster ports up here:
CLUSTER::> net int show -role cluster (network interface show) Logical Status Network Current Current Is Vserver Interface Admin/Oper Address/Mask Node Port Home ----------- ---------- ---------- ------------------ ------------- ------- ---- Cluster Node1_clus1 up/up 169.254.101.103/16 node1 e0a true Node1_clus2 up/up 169.254.210.167/16 node1 e0b true Node2_clus1 up/up 169.254.44.143/16 node2 e0a true Node2_clus2 up/up 169.254.161.155/16 node2 e0b true Node3_clus1 up/up 169.254.15.190/16 node3 e0a true Node3_clus2 up/up 169.254.223.100/16 node3 e0b true Node4_clus1 up/up 169.254.183.224/16 node4 e0a true node4_clus2 up/up 169.254.221.115/16 node4 e0b true 8 entries were displayed.
CLUSTER::> net port show -broadcast-domain Cluster (network port show)
Node: node1 Speed(Mbps) Health Port IPspace Broadcast Domain Link MTU Admin/Oper Status --------- ------------ ---------------- ---- ---- ----------- -------- e0a Cluster Cluster up 9000 auto/10000 healthy e0b Cluster Cluster up 9000 auto/10000 healthy
Node: node2 Speed(Mbps) Health Port IPspace Broadcast Domain Link MTU Admin/Oper Status --------- ------------ ---------------- ---- ---- ----------- -------- e0a Cluster Cluster up 9000 auto/10000 healthy e0b Cluster Cluster up 9000 auto/10000 healthy
Node: node3 Speed(Mbps) Health Port IPspace Broadcast Domain Link MTU Admin/Oper Status --------- ------------ ---------------- ---- ---- ----------- -------- e0a Cluster Cluster up 9000 auto/10000 healthy e0b Cluster Cluster up 9000 auto/10000 healthy
Node: node4 Speed(Mbps) Health Port IPspace Broadcast Domain Link MTU Admin/Oper Status --------- ------------ ---------------- ---- ---- ----------- -------- e0a Cluster Cluster up 9000 auto/10000 healthy e0b Cluster Cluster up 9000 auto/10000 healthy 8 entries were displayed.
Alexander Griesser Head of Systems Operations
ANEXIA Internetdienstleistungs GmbH
E-Mail: AGriesser@anexia-it.com Web: http://www.anexia-it.com
Anschrift Hauptsitz Klagenfurt: Feldkirchnerstraße 140, 9020 Klagenfurt Geschäftsführer: Alexander Windbichler Firmenbuch: FN 289918a | Gerichtsstand: Klagenfurt | UID-Nummer: AT U63216601
-----Ursprüngliche Nachricht----- Von: Jason Gorrie jbgorrie@uwaterloo.ca Gesendet: Mittwoch, 17. Juni 2020 13:54 An: Alexander Griesser AGriesser@anexia-it.com Betreff: Re: CSM MismatchRemoteDevice
Hi,
I have pages of those on a newly expanded cluster (was 6 nodes, now 10 for a tech refresh). CDP is enabled all over, and “net device-discovery show” shows good data. Currently 9.5P12.
I do have one of the ports down (bad cable, RMA taking 4+ days) so perhaps that is why? — Jason
On Jun 17, 2020, at 00:33, Alexander Griesser AGriesser@anexia-it.com wrote:
Hey toasters,
anyone ever experienced such messages in the event log? Mines are getting flooded here. It’s a 4-Node cluster (9.6P1) and someone forgot to enable CDP on two of the nodes, which (according to the syslog translator) might seem to be the reason for this issue.
CLUSTER::> event log show Time Node Severity Event
6/17/2020 06:28:18 node1 ERROR csm.mismatchRemoteDevice: CSM connection between source LIF 1012 and destination address 169.254.221.115 might not be optimal for session 0b05995fad05cdb0. The source is currently connected to CLUSTER-sw02 remote device and the destination is currently connected to - remote device.
https://mysupport.netapp.com/site/bugs-online/syslog-translator/details?even...
The corrective action in this link just says: „Ensure that the Cisco Discover Protocol (CDP) is running on the nodes and switches. In addition, ensure that the cluster ports are up and the cluster LIFs are configured and hosted according to the suggested cluster configuration."
I’ve enabled CDP now for all nodes, cluster ports are up and all the lifs are where they should be. Do I need to restart this CSM service or something like that in order to retry CDP resolution and get rid of this message?
Thanks,
Alexander Griesser