Greetings, Has anybody upgraded to Ontap 7mode 8.2.5 on FAS8020? I do have a case in, but as you can imagine it is moving slowly. I dont yet feel the need to start screaming.
The Ontap update is autoupdating the SP to 3.0.4, and causing some issues:
sp.device.fw.mismatch:warning]: Device firmware version mismatch detected: eth_switch:Rev:2,Img:3-mismatch
Couple of oddities with this:
There isn't a 3.0.4 SP firmware available via netapp website nor is it documented in the SP matrix https://mysupport.netapp.com/NOW/cgi-bin/fw?platform=FAS8020&type=sp_ont... https://mysupport.netapp.com/NOW/download/tools/serviceimage/support/Service...
I've gone into debug mode and issued SP netapp01*> sp switch-update
Which seems to have worked, but the new error then becomes: sp.device.fw.mismatch:warning]: Device firmware version mismatch detected: 12:Rev:fan,Img:-mismatch
So I presume I should run: SP netapp01*> system fan update Warning: system sensors monitor and system sensors thermal-mgmt should be disabled both on this controller and partner controller (if installed). Continue? [y/n]
At which point I thought it best to figure out exactly what is going on here.
I think the following message might be related. monitor.temp.unreadable:info]: The controller temperature (CPU0 Temp Margin) is not readable.
Regards, Douglas