That is correct. No matter what kind of switch you are connected to, you should force but sides to Full duplex.
John Gaines
-----Original Message----- From: owner-toasters@mathworks.com [mailto:owner-toasters@mathworks.com]On Behalf Of Lee Razo Sent: Friday, December 17, 1999 10:29 AM To: Walsh, Warren (MN65) Cc: toasters Subject: RE: toasters and auto negotiation
I should clarify... by "won't work", I mean it will negotiate at the wrong media type. The 'auto' side will negotiate to 'half' when connected to a full duplex port.
On Fri, 17 Dec 1999, Lee Razo wrote:
Hi Warren,
Were you using autonegotiation against full duplex? If so, that isn't going to work by the specs for auto-negotiation. I think the
designers of
the protocol assumed if your nic (or switch port) was too old to support autonegotiation, then it was to old to support full duplex.
So auto <--> half works and auto <--> auto works but auto <--> full won't by specification.
That is my understanding, at least. Feel free to correct me if
I am wrong.
--Lee
On Fri, 17 Dec 1999, Walsh, Warren (MN65) wrote:
We recently converted our 330 and 540 from FDDI to 100BaseT.
We found that
we had to manually force both the 100BaseT card in the toaster and the specific port on our Cabletron Smart Switch 9000 to
100BaseT-FD. For the
100BaseT card, it was simply changing the auto to 100tx-fd:
ifconfig e5 `hostname`-e5 mediatype 100tx-fd netmask 255.255.248.0
Funny how that auto-negotiation thing never really works, and
how much it
really affects performance.
-warren
Warren Walsh Honeywell Technology Center
-----Original Message----- From: Mark D Fowle [mailto:Fowle_Mark_D@CAT.com] Sent: Thursday, December 16, 1999 6:24 AM To: toasters Cc: Bruce A Seelinger Subject:
Has anyone experienced the following problem - When my F740
reboots it will
not come up on line. My work around at the present time is to pull the gigabit cable out
of the flier
then putting it back on. This seems to "wake-up" the connection. I have not been able to figure
our exactly whats
going on and our network administrator has looked at the Cisco 5505 on a wsx5403 (a 3
port gigabit)
-- Notice the 0.0.0.0 for adding the default, "default" stopped working ---
---------rc file ---------- #Auto-generated by setup Mon Oct 18 07:53:04 EDT 1999 hostname filer1 ifconfig e7 `hostname`-e7 netmask 255.255.255.0 ifconfig e7 mediatype auto `hostname`-e7 netmask 255.255.255.0 timezone US/Eastern route add 0.0.0.0 <our gateway> 1 routed on rc_toggle_basic alttune e3 LinkNegotiation 1 rc_toggle_basic ypset < our dns server> rc_toggle_basic savecore exportfs -av nfs on
Lee Razo (lrazo@netapp.com) Network Appliance Europe Hoofddorp, Netherlands
"We are going to thank our bottoms tonight just for being there" -Femi Kuti
Lee Razo (lrazo@netapp.com) Network Appliance Europe Hoofddorp, Netherlands
"We are going to thank our bottoms tonight just for being there" -Femi Kuti