Hello,
I had to run secureadmin command after upgrade to 8.0.2 to access FilerView.
Eino Tuominen
On 1.9.2011, at 6.16, "Douglas Siggins" <dsiggins@maileig.commailto:dsiggins@maileig.com> wrote:
Other two suggestions: 1. check the options httpd.admin (ssl) 2. check the hosts.allow
It seems given you've re-installed ontap all of the files should be in the correct spot.
-----Original Message----- From: toasters-bounces@teaparty.netmailto:toasters-bounces@teaparty.net on behalf of Klise, Steve Sent: Wed 8/31/2011 10:17 PM To: 'tmacmd@gmail.commailto:tmacmd@gmail.com' Cc: 'toasters@teaparty.netmailto:toasters@teaparty.net' Subject: Re: 8.0.2p1
Yep. Thought I had mentioned that but yes, tried the installed version. I am thinking of going back to 8.01px or a new 802D if its out there yet. Thanks for the suggestion.
Strange issue.
----- Original Message ----- From: tmac [mailto:tmacmd@gmail.commailto:tmacmd@gmail.com] Sent: Wednesday, August 31, 2011 07:11 PM To: Klise, Steve Cc: chaim.rieger@gmail.commailto:chaim.rieger@gmail.com <chaim.rieger@gmail.commailto:chaim.rieger@gmail.com>; sklise@hotmail.commailto:sklise@hotmail.com <sklise@hotmail.commailto:sklise@hotmail.com>; toasters@teaparty.netmailto:toasters@teaparty.net <toasters@teaparty.netmailto:toasters@teaparty.net> Subject: Re: 8.0.2p1
Just curious...
Have you tried re-installing the software and rebooting?
i.e. software install 802p1.tgz download reboot
--tmac Tim McCarthy Principal Consultant
On Wed, Aug 31, 2011 at 9:21 PM, Klise, Steve <klises@sutterhealth.orgmailto:klises@sutterhealth.org> wrote:
Nope.
Tried IP name, fully qualfied name, different browser IE6 8 9
From: Chaim Rieger [mailto:chaim.rieger@gmail.commailto:chaim.rieger@gmail.com] Sent: Wednesday, August 31, 2011 06:18 PM To: steve klise <sklise@hotmail.commailto:sklise@hotmail.com> Cc: toasters@teaparty.netmailto:toasters@teaparty.net <toasters@teaparty.netmailto:toasters@teaparty.net> Subject: Re: 8.0.2p1
Can you access it via the ip address
On Aug 31, 2011 9:16 PM, "steve klise" <sklise@hotmail.commailto:sklise@hotmail.com> wrote:
Figured I would ask the crowed this one... I have a current issue with a version of ontap (8x) and we have been working with support to reproduce in our lab and at Netapp (NDMP is not working with some of our vols). Make a long story short, the filer (FAS6030) was running 7.3x, upgraded to 8.01p2, then we ran our test; it failed, I reverted to 7.x unsuccessfully (didn't RTFM going backwards... So it was bad). I had to go on vaction and a Netapp SE came onsight to repair and get the filer back up to 8.x for the support folks. I was not there, but the current filer is running is runnin OT 8.0.2p1 and I can do the normal console stuff, system manager, blah blah. Problem:filerview is not launching, and I don't think it ever has worked since 8.0.1p2. I compared to another files options, and they all seemed in order. I also ran the software download and rebooted. What is strange is I can telnet to port 80, but I get a 404 errror. I tried via IP, via ip/Na_filer, everything I can think of.. Its in the IO lab, so I can blast it... Any suggestions is appreciated..
Toasters mailing list mailto:Toasters@teaparty.net Toasters@teaparty.netmailto:Toasters@teaparty.net http://www.teaparty.net/mailman/listinfo/toasters http://www.teaparty.net/mailman/listinfo/toasters
_______________________________________________ Toasters mailing list mailto:Toasters@teaparty.netToasters@teaparty.netmailto:Toasters@teaparty.net http://www.teaparty.net/mailman/listinfo/toastershttp://www.teaparty.net/mailman/listinfo/toasters
_______________________________________________ Toasters mailing list Toasters@teaparty.netmailto:Toasters@teaparty.net http://www.teaparty.net/mailman/listinfo/toasters