I had something a little similar I suspect... Try toggling your RIP by "routed off|on". You should also check that your /etc/rc contains something like:
route add default 223.21.95.254 1
Eyal.
Maybe we should start sending rc files of each site so we can compare ?
Ours is:
#Auto-generated by setup Wed Nov 25 15:29:16 IST 1998 hostname netapp2 vif create multi vif0 e0 e3a e3b e3c ifconfig vif0 `hostname`-vif0 mediatype 100tx-fd -wins route add default 223.21.95.254 1 timezone Israel options raid.reconstruct_speed 8 options dns.domainname msil.sps.mot.com options dns.enable off options nis.domainname netmaster options nis.enable on savecore nfs on exportfs -a options autosupport.mailhost msgtel1 options autosupport.to r55789@msgtel1.sps.mot.com,netapp@msil.sps.mot.com,autosupport@netapp.com,netapp@ankor.co.il
options autosupport.noteto netapp_pager@msil.sps.mot.com options autosupport.from MSIL_NetApp2_Design4 options cifs.home_dir /vol/design4/users options cifs.show_snapshot true options cifs.symlinks.enable on options nfs.per_client_stats.enable on snmp contact 'Eyal Traitel' snmp location 'Herzelya, Israel' snmp community add ro msil_filers snmp traphost add netman snmp init 1 ndmpd on options timed.servers timehost1,timehost2,timehost3 options timed.proto ntp options timed.enable on
******************************************************************************************
Can someone recommend/suggest anything about this rc ?
Eyal.
******************************************************************************************
Mike Mueller wrote:
Thanks for the suggestion, but alas this is also not it. Our F540 has 2 interfaces, one of which is FDDI (which doesn't have the problem) and the other is already set to not negotiate as 100tx-fd along with the switch port. The F740 has 1 interface and is set to autonegotiate, but since it hasn't had the drastic performance problems observed with a duplex mismatch and since the F540 is set to not negotiate this rules out this as a factor.
-- Mike
At 11:17 AM 11/8/99 , G D Geen wrote:
Mike,
I am not familiar with this hub. Be sure to set the port(s) on the hub to a fixed entity, such as 100 Base-T Full Duplex, and then configure the interface of the filer to the same setting using "ifconfig". Having the interface of the filer or the ports on your router auto detecting anything leads to odd results.
-gdg