Hi Steve,
I think what you are looking for is a packet trace. Here's the command:
fas6070a*> pktt Usage: pktt start <if>|all [-d dir] [-m pklen] [-b bsize] [-i ipaddr -i ...] pktt pause <if>|all pktt dump [<if>|all [-d dir]] | [<if> [-f file]] pktt stop <if>|all pktt status [<if>|all] [-v] pktt delete [filename.trc]+ pktt list fas6070a*>
example:
pktt start e0 {do the network connecction that you want to trace; try to be quick so that you don't have so much traffic to analyze.) pktt dump pktt stop
The file will be created at the root of the root volume. (or you can specify the directory to write the file with the -d option)
You can read the file with Ethereal or any packet trace analyzer.
Would like to know if this works for you!
Thanks,
Deborah ________________________________
From: Pazder, Steve B [mailto:Steve.B.Pazder@dynegy.com] Sent: Tuesday, April 24, 2007 9:38 AM To: toasters@mathworks.com Subject: network troubleshooting
Hello World!
Our Network admin has been working with Cisco to troubleshoot some issues (limited to 1 switch on 1 particular floor). While our Filers are not involved in this issue, fingers are generally pointed in that direction just because they exist....on the network. Our network admin is looking for information from the Filers that would be akin to a TCP dump. Ifstat, netstat and statit output are not providing the information being looked for (handshake info, etc). I haven't run across this particular issue before and don't recall ever seeing it presented to Toasters. Does anyone know of a way to get the actual communication dumps (again, a TCP dump) from a Filer?
Thanks!
Steve