NTP on 8.x seems to much more fragile than it was under 7.x. It will often show as enabled, but not really be running, especially after network glitches.
From a unix box, run `ntpq -p FILER` and see if NTP is running. If it isn't, do options timed.enable off, and then on again.
See https://kb.netapp.com/support/index?page=content&id=1012660 for more details.
John
From: toasters-bounces@teaparty.net [mailto:toasters-bounces@teaparty.net] On Behalf Of steve klise Sent: Tuesday, November 29, 2011 4:31 PM To: toasters@teaparty.net Subject: 8.0.2p3 NTP issue?
may have hit a bug, but support dosen't show anything yet...
The time is off on an HA pair 3270's running DOT 8.0.2p3 7-mode. I have other filers that have the same NTP settings and are in synch. I had to manually set the time on these 3270's before I exceeded 5 minutes for my CIFS clients.
Has anyone else noticed or dose anyone have any suggestions?
Thanks