one other caveat, the snapmirror source cannot be a newer ontap than the target.
ie 7.2 -> 7.0.5 will not work but 7.0.5 -> 7.2 will
-- Daniel Leeds Senior Systems Administrator Edmunds.com
-----Original Message----- From: owner-toasters@mathworks.com on behalf of Fox, Adam Sent: Wed 8/8/2007 3:30 PM To: David McWilliams; NetApp list Subject: RE: Snapmirror data not in a qtree
Assuming you want to use snapmirror, you have 2 options:
1) You can do a volume snapmirror. This will pick up everything (including snapshots), and will put it all on the other side. But the volumes must be of like type (flex -> flex or trad -> trad). 2) You can use QSM and use - as the source qtree name. This will grab all data not in a user created qtree. However, the destination must be a real qtree so the data won't be in the same place on the destination.
Outside of SnapMirror, you can use ndmpcopy and move any subset of data you want.
-- Adam Fox adamfox@netapp.com
________________________________
From: David McWilliams [mailto:davidkmcw@gmail.com] Sent: Wednesday, August 08, 2007 5:13 PM To: NetApp list Subject: Snapmirror data not in a qtree
I'm migrating data from an old to a new filer and we have lots of data in qtrees and a significant amount that is at the same directory level, but not in a qtree. Any ideas?