There has been no update from me. We haven't heard anything back from NetApp and don't have a timetable for anything. If something comes up I'll try to remember to post a reply.
Jeff
On Thu, Sep 12, 2013 at 4:56 AM, Uddhav Regmi uregmi111@gmail.com wrote:
Was there a thread after this ?****
Just making sure, I’m getting them all….****
*From:* toasters-bounces@teaparty.net [mailto: toasters-bounces@teaparty.net] *On Behalf Of *Jeff Cleverley *Sent:* Tuesday, September 03, 2013 5:29 PM *To:* tmac *Cc:* <,Toasters@teaparty.net>, *Subject:* Re: Third party LR 10G networking.****
It sounds like someone else may be working that already. If they get one approved we may be able to piggy back on that. ****
Thanks,****
Jeff****
On Tue, Sep 3, 2013 at 2:04 PM, tmac tmacmd@gmail.com wrote:****
Ask for a PVR from NetApp. The card with removable optics should support the LRs, NetApp would just needed to support the driver.****
On Sep 3, 2013 3:56 PM, "Jeff Cleverley" jeff.cleverley@avagotech.com wrote:****
We're looking at having multiple connections per filer going to a switch in each room to remove the switch as a single point of failure. The single mode cabling will most likely be more compatible with 40G and 100G networking in the next few years. ****
Jeff****
On Tue, Sep 3, 2013 at 1:05 PM, tmac tmacmd@gmail.com wrote:****
Why not use SR optics from the NetApp to the switch (supported by netapp)*
And then LR optics between switches?****
--tmac****
*Tim McCarthy*****
*Principal Consultant*****
****
Clustered ONTAP Clustered ONTAP****NCDA ID: XK7R3GEKC1QQ2LVD RHCE6 110-107-141https://www.redhat.com/wapps/training/certification/verify.html?certNumber=110-107-141&isSearch=False&verify=Verify NCSIE ID: C14QPHE21FR4YWD4****
Expires: 08 November 2014 Current until Aug 02, 2016 Expires: 08 November 2014****
On Tue, Sep 3, 2013 at 2:57 PM, Jeff Cleverley < jeff.cleverley@avagotech.com> wrote:****
Greetings,****
We are looking at upgrading and changing our network architecture. One option would be to use LR GBIC with single mode fibre. This appears to require non-NetApp GBIC which I'm sure makes it unsupported.****
Is anyone doing this, and if so, which parts are you using and what issues have you run into?****
Thanks,
Jeff
-- Jeff Cleverley Unix Systems Administrator 4380 Ziegler Road Fort Collins, Colorado 80525 970-288-4611****
Toasters mailing list Toasters@teaparty.net http://www.teaparty.net/mailman/listinfo/toasters****
-- Jeff Cleverley Unix Systems Administrator 4380 Ziegler Road Fort Collins, Colorado 80525 970-288-4611****
-- Jeff Cleverley Unix Systems Administrator 4380 Ziegler Road Fort Collins, Colorado 80525 970-288-4611****