Hi All,
The httpd.access file is critical.
The http functionality will only work for one volume as specified by httpd.rootdir
You must have all your qtrees in the above volume in the httpd.access file.
Give it a try.
Thanks Eugene =)
-----Original Message----- From: owner-toasters@mathworks.com [mailto:owner-toasters@mathworks.com] On Behalf Of JacekN Sent: Tuesday, September 26, 2006 16:49 To: toasters Cc: Borzenkov, Andrey Subject: Re: Troubleshooting http access
Borzenkov, Andrey napisał(a):
Well, I tested and (under 7.2) it seems to work for me.
...
Example was directly from httpd.access manual page.
Yes, your example worked for me as well. But it is still mistery why my setup is not working. I believe that it could be caused by file format (my final tests were done using rdfile/wrfile) because the same config file in some trials was OK in some not...
Are you sure access is not cached somewhere in between? Also http needs some time to catch up with changes.
Yes, I have tested that it is not caching issue.
Best regards,
Jacek
--- avast! Antivirus: Outbound message clean. Virus Database (VPS): 0639-2, 2006-09-26 Tested on: 2006-09-26 22:48:58 avast! - copyright (c) 1988-2006 ALWIL Software. http://www.avast.com