1 May
2002
1 May
'02
7:31 p.m.
Hello,
I'm trying to get my Adic FastStore 22 tape autoloader to work with my F760 i'm running 6.2.1. I set the loaders SCSI ID to 0 and the drive to 1 and I have also tried other combinations also, keeping in mind that the SCSI card in the F760 uses ID 7. When I boot the filer up it just hangs after it checks the memory. If I unplug the autoloader it boots up with no problems. The autoloader is terminated and all connections are good. Any help would be very appreciated.
Thanks for your help.
Blake