19 May
2003
19 May
'03
6:55 p.m.
That's strange. I tried one of those and it didn't work. It's a black rj45->db9 connector labeled TERMINAL and it's the one I was using to attach to the serial port of a laptop to console into the cisco. I know the console port on the netapp works fine though because I can get into that with a serial cable and a laptop.
-----Original Message----- From: Jason.Santos@pinnaclewest.com To: DFinn@studentadvantage.com Sent: 5/19/03 1:52 PM Subject: RE: sem-OT : rj45->db9 pin-out to connect to netapps console port
They are pinned out the same as the adapters that came with the 2511 (labeled Terminal, I think). I have some at home, don't have one here, I can e-mail you later if you still didn't find it.
--
Jason Santos
Sr. Unix System Administrator
APS/Pinnacle West
Phoenix, AZ USA
-----Original Message-----
From: DFinn@studentadvantage.com [mailto:DFinn@studentadvantage.com]
Sent: Monday, May 19, 2003 10:32 AM
To: toasters@mathworks.com
Subject: sem-OT : rj45->db9 pin-out to connect to netapps console port
I've decided to try and use the Cisco 2511-RJ that we currently have in
place for our sun gear and connect the netapps to that for network
console connections. I picked up some rj45->db9 connectors that need to
be pin'd out. Does anyone know how these are pin'd out offhand?
Thanks
Dan