This can lead to a sad trail of tears..depending.
Your new added larger drives will only participate in the full aggregate data stripe to the point they are the 'same size' as the rest of the drives in the aggregate.
I think you mean raid group here. So long as all disks in a RG are the same size, you don't waste any space. You can have a RG of 300G disks and a different RG of 600G disks in the same aggregate and not waste any disk space.
Data higher than that 'water mark' of 300g deep on the 600g drives, will go to what in effect will perform like a new aggregate of separate 300g drives..you wont have an aggregate wide stripe anymore above that point.
For all of the other problems it can create, just make it a second aggregate by itself.
Theres no big party foul in mixing speeds, most often, people are adding faster ones to slower ones these days, so the change is a net positive.
If you have a massively sensitive IOPS aware application, then dont mix speeds DOWN any.
On Fri, Nov 4, 2011 at 7:23 AM, Vervloesem Wouter < wouter.vervloesem@neoria.be> wrote:
There is another option, the DS4243 shelf with 15K disks. this can be 300GB / 450GB / 600GB. It is possible to mix RPM's in an aggregate / raidgroup but this takes down the performance to the lowest RPM, so if you would expand the aggregate I would use the same size and RPM.
The cost per GB is one factor to count, but don't forget the performance impact of bigger disks. You can put twice the amount of data on a 600GB disk, but have the same amount of IOPS as a 300GB disk...
Mvg, Wouter Vervloesem
Neoria - Uptime Group Business Park King Square Veldkant 35D B-2550 Kontich
Tel: +32 (0)3 451 23 82 Mailto: wouter.vervloesem@neoria.be Web: http://www.uptimegroup.be
Op 4-nov.-2011, om 15:07 heeft Joosep Meus het volgende geschreven:
Hi list!
Currently we have 3 DS14mk4 shelves full of 300GB 3,5" 15K FC drives.
All drives are in a single aggregate in three raid groups with two spare disks.
Time has come to upgrade capacity in the aggregate and i'm thinking of 3
possible ways:
[a] buy another DS14mk4 shelf and continue with 300GB drives - safest
way, but most expensive per GB
[b] buy another DS14mk4 but use 600GB drives - probably good idea, not
so expensive as [a]
[c] buy DS2246 with 600GB SAS drives - Probably not a good idea, since
drives are different type(in this case 2,5" 10K SAS), but it seems that future will be SAS', it's cheaper per GB and takes less space in rack.
As i understand, it is possible to use different drive types in the
single aggregate(allthough not recommended), but probably will have some impact on performance.
Right now my first choice would be [b] followed by [a]. If anyone would
share his/her thoughts on the matter I would be most grateful.
Thanks, Joosep _______________________________________________ Toasters mailing list Toasters@teaparty.net http://www.teaparty.net/mailman/listinfo/toasters
Toasters mailing list Toasters@teaparty.net http://www.teaparty.net/mailman/listinfo/toasters
--
Gustatus Similis Pullus
Steve Losen scl@virginia.edu phone: 434-924-0640
University of Virginia ITC Unix Support