What is the result of "iscsi show initiator" on the filer?
-----Original Message----- From: Theo Dijkstra [mailto:dijxtra@xs4all.nl] Sent: Thursday, April 26, 2007 3:41 AM To: toasters@mathworks.com Subject: Phantom LUN
Hi there,
I got a phantom lun showing up in my messages file when starting the iSCSI service:
-------- [root@blue snapdrive]# sanlun lun show no filer LUNs available -------- snap1> lun show snap1> version NetApp Release 7.2.1: Sun Dec 10 00:23:08 PST 2006 -------- iscsi service start:
Apr 26 09:22:24 blue iscsi: iscsi config check succeeded Apr 26 09:22:24 blue kernel: iscsi-sfnet: Loading iscsi_sfnet version 4:0.1.11-3 Apr 26 09:22:24 blue kernel: iscsi-sfnet: Control device major number 254 Apr 26 09:22:24 blue iscsi: Loading iscsi driver: succeeded Apr 26 09:22:29 blue iscsid[4950]: version 4:0.1.11-3 variant (02-May-2006) Apr 26 09:22:29 blue iscsi: iscsid startup succeeded Apr 26 09:22:29 blue iscsid[4954]: Connected to Discovery Address 192.168.1.81 Apr 26 09:22:29 blue kernel: iscsi-sfnet:host4: Session established Apr 26 09:22:29 blue kernel: scsi4 : SFNet iSCSI driver Apr 26 09:22:29 blue kernel: scsi: unknown device type 31 Apr 26 09:22:29 blue kernel: Vendor: NETAPP Model: LUN
Rev: 0.2 Apr 26 09:22:29 blue kernel: Type: Unknown
ANSI SCSI revision: 04 Apr 26 09:24:59 blue ntpd[3373]: kernel time sync enabled 0001 ---
Where does it get it from? This happened after a crash of the linux box while I was testing some multipathing. This in hindering other operations like mounting new luns etc.
-Theo