Hello, I am in the CSR team which monitors the filer crashes that result from using non-Network Appliance approves SIMMs. The purpose of this message is to clarify the discussion that is going on with regards to Network Appliance certifying Kingston Memory for use in Netapp Filers. We have not certified ALL Kingston memory for use in Netapp filers. In fact there are only a select few that meet the demands inside our boxes. Also note that this entire discussion is in regards to the F/C200/300 line of filers only. These are the only models of Netapp Filers that we have approved third party memory for, except for our older 450/1400 models (to my knowledge).
Netapp has not recommended sub standard memory. If the memory is not listed on the Network Appliance Qualified Memory list, then it is not recommended, or more importantly, not supported, in any Netapp Filer. I, personally, have had to deny support to individuals who are using non approved SIMMs. The below listed SIMMs are qualified to give the same quality service as memory that is purchased from Network Appliance directly.
For reference, I have attached the list in Excel format. Here's the text version of the list:
Netapp F200/300 Qualified Memory Manufacturer and Model # Data Chipset Parity Chipset (16 per SIMM) (8 per SIMM) Kingston KTM8X36L-60G Samsung KM44C4100AK-6 SAMSUNG KM41C4000CJ-6 Kingston KTM8X36L-60G NEC 4217400-60 Hitachi HM514100CS6 or Hitachi HM514100BS6 or Hitachi HD56D836BR-7A Hitachi HM5117400AS6 Hitachi HM514100CS6 or Hitachi HM514100BS6 or Hitachi HD56D836BR-6A Hitachi HM5117400AS6 Hitachi HM514100CS6 or Hitachi HM514100BS6 or Unigen UG18M83602KBG-60 Siemens HYB5117400BJ-60 Toshiba TC5117440BSJ-60
Jeff Sloan Network Appliance 408.822.4754
-----Original Message----- From: owner-dl-toasters@netapp.com [mailto:owner-dl-toasters@netapp.com]On Behalf Of Shaun T. Erickson Sent: Monday, August 30, 1999 11:55 AM To: sirbruce@ix.netcom.com Cc: toasters@mathworks.com Subject: Re: Parts source for end of life products?
sirbruce@ix.netcom.com wrote:
On 08/30/99 23:49:43 you wrote:
However, the price of RAM from NetApp was 3-5x the price
(I forget exactly
how much) of the approved Kingston SIMM. So, we just
purchased 16 SIMMs
from our Kingston supplier, saving significant amounts of
cash, and we
kept the 4 excess SIMMS in our `hot spare' store. It
works like a charm.
A cautionary note - much of the supposedly "in-spec" memory Kingston or other vendors sell is not capable of handling the strict timing and loading requirements of a Netapp filer. The reason the SIMMs you get from Netapp cost more is because they are tested for proper tolerance and inoperability. If you decide to use another source, you should be prepared for the chance of crashes or spontaneous reboots and be prepared to go through several cycles of swapping various SIMMs in various combinations to figure out the problem.
Then NetApp shouldn't certify them. If I buy memory NetApp approved memory from Kingston (and I have), I expect it to perform as well as NetApp supplied memory. I don't expect NetApp to recommend sub-standard memory for me to buy.
-ste
-- Work: (908) 582-7629 Pager: (800) 756-1133 Cell: (908) 672-6456