I created a volume ("foo") on one of my FAS2240-4's running 8.1.2P3. The added exports line is:
/vol/foo -sec=sys,rw,nosuid
I don't see anything incorrect. Of course, I would normally have to edit this to match our local requirements. If you are asking how to define the default export line added for new volumes, I don't believe there is any documented way to do this.
- Jim Littlefield
On Apr 23, 2013, at 12:19 PM, Jeff Cleverley <jeff.cleverley@avagotech.commailto:jeff.cleverley@avagotech.com> wrote:
Greetings,
I have some NearStores that I have upgraded to 8.1.2P3. I've found that since I've upgraded, when I create a new file system the auto-creation of the export string has changed. It is now incorrect and all the new exports are invalid. It isn't using what any of the others are using and it isn't tied into the vol0 export either.
Where or how do I change what is uses for default export string when a new volume is created?
Thanks,
Jeff
-- Jeff Cleverley Unix Systems Administrator 4380 Ziegler Road Fort Collins, Colorado 80525 970-288-4611 _______________________________________________ Toasters mailing list Toasters@teaparty.netmailto:Toasters@teaparty.net http://www.teaparty.net/mailman/listinfo/toasters
This email and any attachments are intended solely for the use of the individual or entity to whom it is addressed and may be confidential and/or privileged.
If you are not one of the named recipients or have received this email in error,
(i) you should not read, disclose, or copy it,
(ii) please notify sender of your receipt by reply email and delete this email and all attachments,
(iii) Dassault Systemes does not accept or assume any liability or responsibility for any use of or reliance on this email.
For other languages, go to http://www.3ds.com/terms/email-disclaimer