We have a backup F740, running 6.4.5, that serves as an insurance to our production, primary, netapp system. And, yes, before someone suggests it, we are in the process of upgrading it to a 270 with a more recent version of ONTAP.
Somehow a second vol0 (obviously traditional since the ONTAP < 7) was created and I'm trying to figure out how to destroy it:
Volume State Status Options vol0 offline normal raidsize=14
Plex /vol0/plex0: online, normal, active RAID group /vol0/plex0/rg0: normal RAID group /vol0/plex0/rg1: normal
vol0 offline normal raidsize=14
Plex /vol0/plex0: online, normal, active RAID group /vol0/plex0/rg0: normal RAID group /vol0/plex0/rg1: normal
A disk in the duplicate vol0 is bad and that's how I discovered the problem:
Volume vol0 (restricted, normal) (block checksums) Plex /vol0/plex0 (online, normal, active) RAID group /vol0/plex0/rg0 (degraded)
RAID Disk Device HA SHELF BAY CHAN Used (MB/blks) Phys (MB/blks) --------- ------ --------------- ---- -------------- -------------- parity 7.48 7 3 0 FC:A 68000/139264000 69536/142410400 data FAILED N/A 68000/139264000
I'm a bit unsure how to proceed. If I pull the disk, will the system not grab one of the spares and rebuild on it? What I'd like to happen is have the system rename the bad vol0 as vol0(1) and then I can use the vol destroy command to get rid of it. How do I do that? If I use the vol rename command, there's the issue of identifying the "bad" vol0 and not the one I want to retain.
There was a ticket in the netapp knowledge base with a procedure but that situation was for a duplicate boot vol0s
I'm sure this is relatively simple yet I haven't come up with a solution.
Michael Homa Operating Systems Support and Database Group Academic Computing and Communication Center University of Illinois at Chicago email: mhoma@uic.edu