No.
I'd recommend following the slot assignments for cards as per the NetApp system configuration guide. It's based on filer model and ONTAP version.
Dave Rubright Jr 4Base Technology, Inc
-----Original Message----- From: Tom Samplonius [mailto:tom@samplonius.org] Sent: Thursday, May 10, 2007 2:33 PM To: Dave Rubright Cc: Scott Lowe; toasters@mathworks.com Subject: Re: GbE card for F840
Is there any different in performance between the different GigE cards?
I noticed that the dual port copper and the quad port copper GigE cards are nearly the same price on the used/refurb market. It seems a bit odd.
----- "Dave Rubright" dave@4basetech.com wrote:
You didn't specify which ONTAP version you plan to use so I'll list the NetApp supported cards for ONTAP GD release 7.0.6.
NetApp PN Description
X1027* GBE with copper X1027B-R5 GBE with copper X1037-R5 Dual GBE with copper
- indicates by RMA only but if you find a card, still works.
How you obtain the cards is up to you.
Dave Rubright Jr 4Base Technology, Inc
From: owner-toasters@mathworks.com [mailto: owner-toasters@mathworks.com ] On Behalf Of Scott Lowe Sent: Thursday, May 10, 2007 10:49 AM To: toasters@mathworks.com Subject: GbE card for F840
Good afternoon all,
I have an old F840 that has been donated for use in a
test/development
lab at my office. I need an inexpensive Gigabit Ethernet
adapter for
this system. Does anyone have any suggestions on what cards are compatible with ONTAP and could be used in this system?
Best regards, Scott Lowe Senior Engineer ePlus Technology, Inc. slowe@eplus.com