Tom Wike wrote:
Alexandre, Stupid question: what SCSI connector is the jukebox on the NetApp attached to?? It cannot be the ones labled 9a or 9b, it needs to be connected to the one labled SCSI 0, on the bottom of the box, next to the console and diag serial ports.
Alexandre Gomes (r7043c) writes:
It is what he gives me when I running probe-scsi command :
root@araras[38]<bin>: probe-scsi -h paje Copyright (c) 1990-1999 by PDC probe-scsi BudTool 4.5 SCSI Bus 0 SCSI Bus 1 SCSI Bus 2 Target 1 Unit 0 Removable Jukebox Device BHTi Q2 1.50 Target 3 Unit 0 Removable Tape Quantum DLT4000 CD5A Target 4 Unit 0 Removable Tape Quantum DLT4000 CD5A root@araras[39]<bin>:
-- Tom Wike UNIX System Administration FDAO Productivity Infrastructure Texas Instruments, Inc.
E-Mail: t-wike@ti.com Regular Mail: 7839 Churchill Way Phone: (972) 917-1252 M/S 3984 Fax: (972) 917-3891 Dallas, TX 75251 Pager: (888) 512-8040
E-Mail my Pager: 5128040@skytel.com Or: http://www.skytel.com/Paging/pageme.cgi?pin=5128040,2
Good morning everybody, Good Morning Tom and Paul,
I was looking on my Network Appliance Server and I need to connect my jukebox robotics on the SCSI 0 of my network like Tom told me. The problem is that the cable has 68 pins and the SCSI 0 of my Network Appliance has 50 pins. I must use a cable that convert of 68 to 50 pins or what I have to do ???? Before it was connect on SCSI 9b and it has 68 pins.....
Thanks !!!