XCP support for NTFS is being worked on, FWIW. :)
-----Original Message----- From: toasters-bounces@teaparty.net [mailto:toasters-bounces@teaparty.net] On Behalf Of Michael Bergman Sent: Thursday, August 25, 2016 7:33 AM To: Toasters Subject: Re: Snapmirror TDP from 7mode to CDOT - Can I 'daisy chain'?
On 2016-08-25 13:17, Basil wrote:
XCP is, like you said, only NFS. If the files are NTFS, which is usually the case,
Very true. I'm in a world where the opposite is true: "If the files are NFS, which is usually the case"..."
I'm sorry.
splitting volumes can only be done with a snapmirror to a new volume then deletion of the files in the volume outside the targeted folder/qtree.
I concur.
Deleting high file count data will take a long time, and depending on the volumes involved, there might not be sufficient room to double up like this.
Yes, but that would not matter (how long it takes) if there's enough "extra space" so to speak. It could take days, a week... no one will really care, right? The only thing that could be bad, is if the target C.DOT node is small. File deletes pressure WAFL quite a lot, you can get performance issues and W latency can shoot up. A lot, in the worst case, due to massive amounts of small file deletes
The last option is a robocopy. You can multithread these to reduce the outage window, but it's going to be a long outage.
Robocopy is one of the tools available for handling CIFS (NTFS) data. There are a few others, but I have not tried any of them exept this one and it works really well (at least then, it was many years ago now).
http://www.xxcopy.com/xcpywhat.htm
This SW is still actively developed, alive and kicking, so this is what I would use if I had to do CIFS/NTFS file copying this way
/M
On Thu, Aug 25, 2016 at 7:08 AM, Michael Bergman <michael.bergman@ericsson.com mailto:michael.bergman@ericsson.com> wrote:
On 2016-08-25 12:06, Edward Rolison wrote: I'm migrating a bunch of volumes from a 7 mode filer, to CDOT. For various reasons, I'd _like_ to split these volumes apart prior to migration - mostly around filecount. We have a few qtrees with really high file counts, and generally they don't make sense to group together anyway. Splitting up file trees that have grown too large in this way is often desirable when migrating, but you should avoid doing it with this messing around with QSM and VSM. Instead you should best use the NetApp tool xcp, which was created for the purpose of effective 7m -> C.DOT migration of data. It works over NFS, so there's no problem with compatibility. With this you can use a suported SnapMirrir 7m -> C.DOT for the bulk of the data, pick out parts that you do with xcp and then delete the superflous files afterwards (when it has landed on C.DOT, after your cut over window). Hopefully you have some extra swing space to be able to pull this off, if not then... Yes, I know it's daunting w.r.t. Very High Filecount. But it's still the best way IMO... rsync is impossible due to the traversing of all the inodes it does every single time on source and target, xcp keeps track of a state that avoids this and it has its own NFS stack built in, which makes it a very different and effective animal than anything else I've ever seen or herad of /M So - what I'm thinking is: QSM from source qtree to 'staging' volume within filer. VSM from staging volume to CDOT TDP volume. Should I be able to do this, or is there a better way? Ideally - I'd like to avoid a 'double cutover' scenario. My 'plan B' involves just creating about 10 replicas of the source volume, and - post cutover - delete all the stuff I didn't need from each of them, but this seems a suboptimal solution. (I think I have the same problem, in that I can't lower the inodes of the volume, so I'll have 10 volumes with 100M+ inodes, instead of 10 with considerably fewer) It certainly seems like a TDP snapmirror doesn't work when a QSM is inbound to the volume in question - but a break and resync _might_ do the trick? (trying to do that now) Is there a better approach I should be taking? _______________________________________________ Toasters mailing list Toasters@teaparty.net <mailto:Toasters@teaparty.net> http://www.teaparty.net/mailman/listinfo/toasters <http://www.teaparty.net/mailman/listinfo/toasters>
-- Michael Bergman Sr Systems Analyst / Storage Architect michael.bergman@ericsson.com Engineering Hub Stockholm Phone +46 10 7152945 EMEA N, Operations North, IT Ops Kista SMS/MMS +46 70 5480835 Ericsson Torshamnsg 33, 16480 Sthlm, Sweden -- This communication is confidential. We only send and receive email on the basis of the terms set out at www.ericsson.com/email_disclaimer _______________________________________________ Toasters mailing list Toasters@teaparty.net http://www.teaparty.net/mailman/listinfo/toasters