No, you won't have to issue the download command becuase you are simply putting an "extra" set of files on those "vol1" disks. You are not actually upgrading the OS of the filer that those disks are attached.
Jason Cody
Network Appliance Professional Services Engineer East Mid-Atlantic Region
jcody@netapp.com 410-299-6290 Cell 888-374-7504 Pager 408-822-8895 Voice Mail 801-340-7018 eFax
-----Original Message----- From: Chuck Ross [mailto:chuckr@nortelnetworks.com] Sent: Thursday, June 29, 2000 8:55 AM To: toasters@mathworks.com Subject: Re: FilerA:vol1 -> FilerB:vol0
Do you have to run the download command?
Chuck
"Timothy A. McCarthy" wrote:
And let us not forget that if the "vol1" disks are clean, or have data on them but there is no /etc directory on it, it will go right into setup and complain about a few tings missing, like timezone stuff and java stuff.
Do yourself a favor, mount the "vol1" on a host someplace as
root/Administrator.
Then do an "upgrade" to vol1. This will simply put the needed files in place. Then do the following on your current filer:
vol offline vol1 halt --> physically remove vol1 and attach it to the new filer -->boot up the new filer with disks attached --> boot from from floppy for this release --> when you get to the 1-5 menu, choose #5, Maintenance Mode. --> now issue the following: vol online vol1 vol rename vol1 vol0 vol options vol0 root reboot (Without the floppies)