4 May
1999
4 May
'99
10:55 p.m.
On Tue, 4 May 1999, Jay Soffian wrote:
It is not clear to me what is involved in adding the LRC card. I don't see this documented in the cluster conversion guide nor in the shelf hardware guide. I have heard that this is a field procedure that Netapp needs to perform and that after it is done, the shelves need to be calibrated. I heard the down time for all of this is supposed to be several hours.
I have had a LRC replaced in a cluster. The actual replacement was very quick. No calibration of any kind was performed after the replacement. I suspect installing secondary LRCs should be relatively quick nonevent.
Tom