Thanks Charles,
Olaf from Netapp set me on the right track yesterday:
I used a combination of these articles to set me on the right track
http://communities.netapp.com/thread/3313
https://now.netapp.com/Knowledgebase/solutionarea.asp?id=kb41190
I still see four 'phantom' drives in Disk Management MMC (+ the real four) but at least the four that I couldn't mount via SnapDrive or would only mount read-only are now OK.
Thanks to everyone for their help.
Raj.
On 11/10/09, Ledbetter, Charles Charles.Ledbetter@netapp.com wrote:
Sounds to me like the NTFS volume inside the LUN is set to Hidden and/or Readonly. There's an old Veritas bug that would cause this.
Look for a utility called "vflag.exe" from Microsoft. Mount the LUN manually and run "vflag -display *" and look for one marked hidden/readonly.
Use vflag to clear it. You can also use Diskpart.exe to do the same thing.
-Charles
-----Original Message----- From: Raj Patel [mailto:phigmov@gmail.com] Sent: Saturday, November 07, 2009 9:27 PM To: toasters@mathworks.com Subject: SnapDrive 6 & Windows 2008 - can't see or connect disks in SD but can see them in Disk Management MMC - only mount read-only
Hi,
Another question - I have a datawarehouse box - has 4 luns -> SD 6.1 and Server 2k8 both 64bit.
I can't seem to reconnect the LUN's using the SD wizard - however they do end up appearing in the Server Disk Management MMC.
Catch is they will only mount read-only (but at least the data is fine).
In iSCSI session management it will see the connected LUN's related to the igroup.
One of two things tends to happen - if I try to use SD I either get a 120 sec time out or I get an error about the lun already being mapped (presumably by the built in iSCSI initiator).
As per a previous post - this box was fine until a controller/ontap upgrade.
I've tried zapping the igroup and mappings on the SAN and removing all traces from SD and the MS iSCSI initiator but I can't seem to overcome this problem.
Any ideas ? Worst case I can carve off a whole new set of LUN's and move the data but I really don't want to have to do that if I don't have to.
Thanks in advance, Raj.