Hello Alexander,
If you have access to NOW or have a printed set of documentation, there is a configuration worksheet found within the "Software Setup Guide".
Drew
-----Original Message----- From: Alexander Schalek [mailto:as@bacher.at] Sent: Thursday, June 29, 2006 2:33 PM To: toasters@mathworks.com Subject: Re: filer configuration sheet for customers
I thought of a paper like this:
FAS3020 Filer Konfiguration: ====================
Data OnTap Version [ ] 7.1.x [ ] 7.0.x [ ] 7.2.x (experimental)
Filer Access [ ] ssh1 [ ] ssh2 [ ] telnet [ ] rsh [ ] trusted hosts:
NETWORK ========== Interface: [ ]e0a [ ]e0b [ ]e0c [ ]e0d IP: 0.0.0.0 Netmask: 0.0.0.0 Default Gateway: 0.0.0.0
Interface Trunk: Interface: [ ]e0a [ ]e0b [ ]e0c [ ]e0d Trunk Mode: [ ]single [ ]multi IP: 0.0.0.0 Netmask: 0.0.0.0 Default Gateway: 0.0.0.0
Remote LAN Module: IP: 0.0.0.0 Netmask: 0.0.0.0 Default Gateway: 0.0.0.0 Mailhost: mailhost@mycompany.com
DNS domainname: mycompany.com nameserver1: 0.0.0.0 nameserver2: 0.0.0.0 nameserver3: 0.0.0.0
NIS nis-master: 0.0.0.0 defaultdomain: mycompany.com
LDAP ldap-server: 0.0.0.0 port: 1234 defaultdomain: mycompany.com
Autosupport [ ] on [ ] off mailhost: mailhost@mycompany.com autosupport.from: filer@mycompany.com autosupport.to: dummy@mycompany.com
STORAGE: ========= Aggregat Konfiguration Name: aggr0 Number of Disken: 13 Number of Hotspare: 1
Volume Konfiguration: Name: vol1 Typ: [ ]trad-vol [ ]flex-vol Aggregat: aggr0 Grösse: 0 GB
iSCSI
FCP
CIFS
NFS
HTTP
etc.
if someone has a complete configuration paper please let me know. thanks!
Alexander
Alexander Schalek schrieb:
hi all,
I am looking for a configuration sheet which I can send our customers before the installation to collect the installation & configuration facts. Anything is better than what I have. Thanks in advance!
Alexander