Sorry, should have said - also did this with the spares. I can see no drives on 'head1' sysconfig -r that are 'wrong' and likewise on 'head2'.
Checked this with grepping 'partner' and ensuring they're all the right pair of controllers. (On both sides)
On 11 June 2015 at 11:56, Borzenkov, Andrei <andrei.borzenkov@ts.fujitsu.com
wrote:
If you just performed “replace” without un-/re-assigning drives that became spare, this is expected. Spares still belong to controller and will block auto assignment.
*From:* toasters-bounces@teaparty.net [mailto: toasters-bounces@teaparty.net] *On Behalf Of *Edward Rolison *Sent:* Thursday, June 11, 2015 1:09 PM *To:* toasters@teaparty.net *Subject:* Disk auto assign
I've just added some new shelves to a (7-mode) filer pair, bring them up to two stacks of 10 shelves.
I'm trying to get 'autoassign' working, and it isn't.
I have:
- swapped drives such that each 'head' has only disks from one 'stack'.
Head 1 has 0a/5b
Head 2 has 5a/5d
I've had to manually trigger a small number of 'replace' operations. And then switched on autoassign in the options.
I _think_ that should be it, but ... there's something I'm missing, because autoassign isn't working.
Does anyone have suggestions for why this might be, or what else I could check? (I'm wondering if there's a misassigned but 'failed' drive that otherwise isn't showing up?)