On Mon, 10 Nov 1997, Chris Caputo wrote:
-On Mon, 10 Nov 1997, Dave Cole wrote: -> Is anyone else out there running F210's or F230's on Cisco 2900s? I can't -> convince the Cisco to automatically handle full duplex, forcing me to put -> the filers on the supervisor card ports which can (more easily than the -> auto-configure ports) be configured for full duplex. - -We always force ports to be what we want them to be (normally Full Duplex -100BaseTX). Ex.: - - set port speed 2/1 100 - set port duplex 2/1 full
Yay!
I've tried and tried to get the cat2900 to change to full duplex with the set port duplex 2/1 full but all it would answer with was 'Port 2/11 is in auto-sensing mode.'
Until today, I could never get it to let go of auto mode, but forcing the speed first does the trick!
Thanks!
-We haven't found the auto-config stuff to work very well on our Cisco 2901 -so we don't use it.
I'm inclined to agree.
------------------------------------------------------------- Dave Cole (DC1110) | dacole@netcom.ca Systems Administrator | dacole@vex.net | office/~dacole/ Netcom Canada | www.vex.net/~dacole/ 905 King Street West, Toronto, M6K 3G9 | phone - 416.341.5801 Toronto, Ontario, Canada, Earth, Sol | fax - 416.341.5725