I agree with you. Mostly I am going to use TCP and as you said about dropped packets, we are working with Cisco to identify the problem. At this moment, I am not confident of using UDP. We will have several Oracle databases running on the filer and I dont want to take any chances to corrupt the data.
Thanks /Deepak
----- Original Message ----- From: "Mike Sphar" mike.sphar@Remedy.COM To: toasters@mathworks.com Sent: Monday, September 23, 2002 12:30 PM Subject: RE: Sun Solaris 8 optimal performance with F880
There is of course some additional overhead associated with the TCP
protocol
though, which is why it really depends on the reliability of your network and clients to determine which of the two protocols is ideal for your environment.
Certainly in the situation being described, where a client is dropping packets, TCP will likely be the better choice. (Though I'd also want to
try
to address the dropped packet problem as well if possible.)
-- Mike Sphar - Sr Systems Administrator - Remedy Corporation
-----Original Message----- From: Michael Salmon [mailto:Michael.Salmon@uab.ericsson.se] Sent: Monday, September 23, 2002 3:59 AM To: toasters@mathworks.com Subject: Re: Sun Solaris 8 optimal performance with F880
On Thursday, September 19, 2002 11:04:35 PM -0700 Deepak Soneji sonejideepak@hotmail.com wrote: +------ | Brian/Tim | | Great ! READS are greatly improved upto 12-15 mbps after changing
xfersize
| to 8k. | Any idea about what magic numbers for read/write I should try to achieve | while tuning ? | | Another question, why TCP ? +-----X8
UDP has no retry mechanism so if you loose any of the 22 packets involved in a 32k transfer then you need to start again. A powerful server sending to a weaker client is a good way to ensure that packets are lost. TCP has mechanism to ensure that packets are not lost and hence works better when the packet recipient is the weaker partner.
/Michael
This space intentionally left non-blank.