What version of Ontap ? - sounds like the bug we encountered - I wrote it up here
http://www.vmadmin.info/2010/11/vfiler-migrate-netapp-lockup.html
Bug ID 90314 Title Heavy file deletion loads can make a filer less responsive
Basically the fix was setting these hidden options to de-prioritize volume deletion related operations (these ops had swamped the netapp during an aborted vfiler migrated (that's another related issue))
options wafl.trunc.throttle.system.max 30 options wafl.trunc.throttle.vol.max 30 options wafl.trunc.throttle.min.size 1530 options wafl.trunc.throttle.hipri.enable off options wafl.trunc.throttle.slice.enable off
So far, we have not seen the issue again.
internal snapshot, snapmirror, dedup operations can account for a large percentage of load and IO We had to scale our snap mirror schedule back after determining 50% of the IOPs were snap mirror related:
http://www.vmadmin.info/2010/07/vmware-and-netapp-deconstructing.html
Good luck,
Fletcher.
On May 15, 2012, at 4:30 PM, Peter D. Gray wrote:
OK, just wondering if anybody can shed light on this.
We just had a massive performance problem on one of our netapps. One aggregate was amazingly busy, with disk drives 100% busy all the time. IO latency went through the roof for all the volumes on the aggregate.
We spent a bit of time on this and we are not novice netapp users. In the end we could not identify the problem. There appeared to be no relationship between the amountof I/O coming from clients and the amount of I/O on the aggregate.
So, we called netapp support. It took them a while (a few days) but eventually they suggested changing the snapshot schedules and removing snapshots off the aggregates and also removing hourly snapshots off the volumes on the aggregate. We complied.
It took a while, but after 5 hours or so, relatively suddenly the problem went away and seems to have stayed away for a day now. I am assuming the snapshot cleanup was the problem and the problem stopped when it finally caught up.
So, I guess my question is "why is snapshot cleanup so expensive".
Do blocks freed from snapshots need to be written, if so why?
It seems snapshot creation is cheap, but deletion expensive, which makes the entire snapshot management cycle rather more trouble then you might hope.
Regards, pdg
Toasters mailing list Toasters@teaparty.net http://www.teaparty.net/mailman/listinfo/toasters