I downloaded ndmpcopy 1.1 from ftp.ndmp.org and used it to duplicate the data across filers. In every case using four different F230's, the dump/restore was successful, but the ndmpcopy never exits, suggesting the source filer may be hung. All the data was transferred, and the source filer is still alive and serving NFS, except it doesn't know that the dump is finished. All the filers are running 4.2a, as shipped. Is this a known problem?
# ./ndmpcopy -v adm1-na1:/home/home1 adm1-na3:/home/home3 -sa root:******** -da root:******** Connecting to adm1-na1. Connecting to adm1-na3. adm1-na1: CONNECT: Connection established. adm1-na3: CONNECT: Connection established. adm1-na1: LOG: DUMP: creating "snapshot_for_dump.1" snapshot. adm1-na1: LOG: DUMP: Date of this level 0 dump: Wed Oct 29 12:11:30 1997 adm1-na1: LOG: DUMP: Date of last level 0 dump: the epoch adm1-na1: LOG: DUMP: Dumping /home/home1/ to NDMP connection adm1-na1: LOG: DUMP: mapping (Pass I) [regular files] adm1-na1: LOG: DUMP: mapping (Pass II) [directories] adm1-na1: LOG: DUMP: estimated 3373500 tape blocks. adm1-na1: LOG: DUMP: dumping (Pass III) [directories] adm1-na1: LOG: DUMP: dumping (Pass IV) [regular files] adm1-na1: LOG: DUMP: 15% done, finished in 0:27 adm1-na1: LOG: DUMP: 32% done, finished in 0:20 adm1-na1: LOG: DUMP: 49% done, finished in 0:15 adm1-na1: LOG: DUMP: 66% done, finished in 0:10 adm1-na1: LOG: DUMP: 82% done, finished in 0:05 adm1-na1: LOG: DUMP: 99% done, finished in 0:00 adm1-na3: HALT: The operation was successful! Waiting for adm1-na1 to halt too. (If it sits here forever, the transfer was successful, but the source filer has hung. Press ^C.) Elapsed time: 0 hours, 32 minutes, 10 seconds.
^C 0.04u 0.00s 37:02.48 0.0%