FWIW...
That "error copying message" sounds like the standard windows disk full message to me. Won't be able to customize that without hacking DLL files.
We use Home drive quotas and DFM. I have DFM set to send two messages. 1. A warning e-mail when their drive reaches 89% full (Started at 85% - was triggering a bit early for a lot of users) 2. Another e-mail when the drive reaches 97% full.
Did not have to do anything special to get DFM to send mail. We were fortunate here in that the user's logon ID in Windows is also setup as a proxy address in Exchange. Keeping the id to mail address mapping current would have been a pain.
The way I understand it, Ontap 6.x documentation, disk quotas don't take effect unless you enter a value into threshold. Me, I have been keeping all three values the same, 500 meg soft 500 meg hard and 500 meg threshold. I am sure there is some benefit to adjusting these to different values. So far, keeping them all the same has been working real good for our organization.
NOTICE - This communication is intended ONLY for the use of the person or entity named above and may contain information that is confidential or legally privileged. If you are not the intended recipient named above or a person responsible for delivering messages or communications to the intended recipient, YOU ARE HEREBY NOTIFIED that any use, distribution, or copying of this communication or any of the information contained in it is strictly prohibited. If you have received this communication in error, please notify us immediately by telephone and then destroy or delete this communication, or return it to us by mail if requested by us. The City of Calgary thanks you for your attention and co-operation.
-----Original Message----- From: owner-toasters@mathworks.com [mailto:owner-toasters@mathworks.com] On Behalf Of Jeff Burton Sent: Wednesday, August 09, 2006 1:47 PM To: toasters@mathworks.com Subject: Windows Exceed Quota Message and Threshold/Soft Quota
Currently when a Windows user exceeds their home directory user disk quota a Windows message is sent out that says, "Error Copying File or Folder\nThere is not enough free disk space". That is starting to cause many users to call our Help Desk telling us we are out of space when in fact we have all sorts of space, we just don't want them using it (I believe a 10GB home directory limit is more than fair). Before we quota the other 14,000 users it would be nice if we could customize that message (netsend message?) to say something like, "You have exceeded your 10GB quota, please delete your mp3's and wedding pictures to free up space". If we could do this for the soft_disk quota/threshold that would be helpful as well. We have DFM but I think that can only email and can't send a message to a persons Windows ID...of course I'm not going to link 16,000 email address with their Windows ID's.
On a related topic that was recently touched upon in toasters...what is the difference between a threshold and a soft_disk quota? Neither send a netsend windows message, neither restrict the write, and both put a message in the messages file regardless of which is higher than the other. The description in the NetApp Manual is below and it sounds like 2 ways of saying the exact same thing.
Ÿ threshold (optional) is the disk space usage point at which warnings of approaching quota limits are issued. Ÿ soft_disk (optional) is a soft quota space limit that, if exceeded, issues warnings rather than rejecting space requests.
Thanks, Jeff
__________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com