At 18:39 29-06-00 -0400, dave toal wrote:
Klaus,
Would you mind briefly explaining the process you used to connect therobotics to the filer? I was unable to determine the correct internal device name of the netapp's robotics controller when I tried this.
Dave
The robotics/library is a STK 9714 . I used the following jbmgr_config.hostname.1 file. One bus of the STK is connected to the Filer SCSI port and the other 2 drives on the STK scsi bus are connected to an SUN Ultra 2. One of my peer workers connected it appropriately and it works fine. I guess one want to work with STK to figure out the proper SCSI bus connections.
ROBOT_DEV_HOST your_filer_hostname ROBOT_DEV_NAME spt0 ROBOT_SCSI_ID 0 ROBOT_SCSI_BUS 0 DATA_DEV_NAME0 nrst0a DATA_DEV_HOST0 your_nac DATA_DEV_NAME1 /dev/rmt/1cbn DATA_DEV_HOST1 your_solaris_host DATA_DEV_NAME2 /dev/rmt/2cbn DATA_DEV_HOST2 your_solaris_host Of course the filer has "ndmpd on" active.
Hope this helps.
Warm regards from Munich Klaus