Marcus,
WAFL "steals" 10%; this loss is inherent in the file system design.
Think about how you lose up to 12% of your free space for the MFT on an NTFS volume; same thing on WAFL except it isn't allocated as a contiguous chunk like the MFT - rather the space is used dynamically to allow the filesystem to function properly.
regards,
Alan.
-----Original Message----- From: Bui, Marcus [mailto:Marcus.Bui@aiminvestments.com] Sent: Friday, 12 September 2003 8:09 AM To: 'toasters@mathworks.com' Subject: volume disk space
I created a volume on F880c, ONTAP 6.4.1, with CIFS as follows: 37 - 72GB disk Raid group size = 14 with 3 Raid groups No snapshot snapshot reserve = 0
But in Filerview the volume space shows 1.98TB and 'df -g' shows 2031GB. I thought the volume space should be 2.257TB (34 data disks x 66.385GB). Map to the volume from a Windows client and it shows 1.98TB. Why am I missing a lot of disk space?
cheers,
Marcus Bui
**** ASI Solutions Disclaimer **** The material transmitted may contain confidential and/or privileged material and is intended only for the addressee. If you receive this in error, please notify the sender and destroy any copies of the material immediately. ASI will protect your Privacy according to the 10 Privacy Principles outlined under the new Privacy Act, Dec 2001.
This email is also subject to copyright. Any use of or reliance upon this material by persons or entities other than the addressee is prohibited.
E-mails may be interfered with, may contain computer viruses or other defects. Under no circumstances do we accept liability for any loss or damage which may result from your receipt of this message or any attachments. **** END OF MESSAGE ****