Did this happen when you upgraded to 6.5.2?
-----Original Message----- From: owner-toasters@mathworks.com [mailto:owner-toasters@mathworks.com] On Behalf Of jeff.mery@ni.com Sent: Monday, January 31, 2005 12:18 PM To: toasters@mathworks.com Subject: McAfee A/V config
The basics: - F940c systems (one cluster) - ONTAP 6.5.2 - ~4.4 TB of data (90% CIFS) - McAfee VirusScan 7.1 for NetApps - 6 x scanner systems (4 x PowerEdge 650SC, 2 x Precision 420) - All scanners scan both filers - All GbE, all systems & filers on same subnet
We've been having a small problem with our McAfee virus scanners lately; they all periodically drop off-line causing much havoc with our pagers. Suggestions from McAfee are that the scanners become too busy and when that happens, they drop off line and reset themselves. However, performance indicators on the scanners don't indicate any problems: CPUs almost idle, no disk I/O, very little network activity. From a filer stand-point, they're practically idle: CPU time averages less than 20%, network and disk I/O is minimal.
I'd like to hear how some of you have your McAfee environments configured and what (if any) issues you've had similar to this one. As usual, much thanks in advance!
Jeff Mery - MCSE, MCP National Instruments
------------------------------------------------------------------------- "Allow me to extol the virtues of the Net Fairy, and of all the fantastic dorks that make the nice packets go from here to there. Amen." TB - Penny Arcade -------------------------------------------------------------------------