what is the cable that you are using? Anything supported? [image: Inline image 1][image: Inline image 2]
--tmac
*Tim McCarthy, **Principal Consultant*
*Proud Member of the #NetAppATeam https://twitter.com/NetAppATeam*
*I Blog at TMACsRack https://tmacsrack.wordpress.com/* On Fri, Jan 27, 2017 at 5:16 AM, Alexander Griesser <AGriesser@anexia-it.com
wrote:
Hi,
I’ve just installed those fancy X1144A cards in one of our AFF300 systems and it seems they’re getting recognized properly, but I’m not able to get a link on them.
sysconfig says:
slot 2: 40 Gigabit Ethernet Controller XL710 QSFP+ e2a MAC Address: 3c:fd:fe:a2:90:c8 (auto-unknown-down) e2e MAC Address: 3c:fd:fe:a2:90:c9 (auto-unknown-down)SAN01::> net port show -port e2*
(network port show)
Node: SAN01-01
Speed(Mbps) HealthPort IPspace Broadcast Domain Link MTU Admin/Oper Status
e2a Default - down 1500 auto/10 -
e2e Default - down 1500 auto/10 -
Node: SAN01-02
Speed(Mbps) HealthPort IPspace Broadcast Domain Link MTU Admin/Oper Status
e2a Default - down 1500 auto/10 -
e2e Default - down 1500 auto/10 -
4 entries were displayed.
For testing purposes, I did connect e2a on node1 to e2a on node 2 and I already tried exchanging the QSFPs and cables, but still no dice.
Any idea what could be wrong here?
According to HWU, the minimum required OS version is 9.1RC2, which is exactly what is installed currently:
SAN01::> version
NetApp Release 9.1RC2: Thu Nov 24 08:59:46 UTC 2016
Best,
*Alexander Griesser*
Head of Systems Operations
ANEXIA Internetdienstleistungs GmbH
E-Mail: AGriesser@anexia-it.com
Anschrift Hauptsitz Klagenfurt: Feldkirchnerstraße 140, 9020 Klagenfurt
Geschäftsführer: Alexander Windbichler
Firmenbuch: FN 289918a | Gerichtsstand: Klagenfurt | UID-Nummer: AT U63216601
Toasters mailing list Toasters@teaparty.net http://www.teaparty.net/mailman/listinfo/toasters
