What does the D8 fix for snapmirror? Inquiring minds want to know. ;) C-
On Fri, Feb 14, 2003 at 07:18:19PM -0600, Hill, Aaron wrote:
We are running 6.3.1 on one filer (F880) and 6.3.1D8 (debug release for a snapmirror problem we were having) on another (F820). 2 others still running 6.2.2 I believe.
As far as I know, all new F960s being shipped have 6.3.1 on them.
So overall, I have to say I recommend it. If you are snapmirroring, make sure you put 6.3.1D8 on your destination filer, that is the advice from our NetApp representative.
Thanks, Aaron Hill Systems Engineer www.navitaire.com
-----Original Message----- From: Paul McGuinness (ext. 771) [mailto:Paul.McGuinness@fineos.com] Sent: Saturday, February 15, 2003 2:58 AM To: 'toasters@mathworks.com' Subject: Data ONTAP Upgrade
Hi, I have a F720 currently running on Data ONTAP 6.1.2R2 and everything is running fine. My question is to those of you 6.6.2 (the current GA release) and those of you on 6.3.1.
I was going to upgrade to 6.2.2, just to keep my system up to date, but according to the NOW site there are a good few more active systems running 6.3.1.
Would 6.3.1 be a better upgrade to go to? I also see that there is now a 6.4 first customer shipment release (12th Feb) but I think I'll leave that for those of you who have filers to play with.... :o)
So 6.6.2 or 6.3.1?
The information contained in this e-mail is confidential, may be privileged and is intended only for the use of the recipient named above. If you are not the intended recipient or a representative of the intended recipient, you have received this e-mail in error and must not copy, use or disclose the contents of this email to anybody else. If you have received this e-mail in error, please notify the sender immediately by return e-mail and permanently delete the copy you received. This email has been swept for computer viruses. However, you should carry out your own virus checks.
Registered in Ireland, No. 205721. http://www.FINEOS.com