what are you plugging the tapes to? Are the FC ports configured for Initiator or target mode?
Did someone setup any type of masking on the Tape Library?
What type of Library is it? What kind of tape drives? Is the firmware current? is the firmware current on the tape Drives? Are the tape drives supported on the FAS3040 heads?
On 8/13/07, Davies,Matt MDAVIES@generalatlantic.com wrote:
Hello all,
Please accept my apologies if I appear stupid, but Fibre Channel is not something I know a lot about.
Previously we had a clustered FAS270, each head had 1 FC tape connection, with each one connecting back to a single ADIC tape library.
At the weekend this was upgraded to a 3040 cluster, and now neither of the 3040 heads see the tape library. Both heads again are connected directly to the tape library as they were with the 270's. There are no fibre channel switches involved.
It would be of great help if anyone could point me in the right direction in troubleshooting this. As NetApp don't appear to be of great help.
Thanks
Matt
This e-mail (including all attachments) is confidential and may be privileged. It is for the exclusive use of the addressee only. If you are not the addressee, you are hereby notified that any dissemination of this communication is strictly prohibited. If you have received this communication in error, please erase all copies of the message and its attachments and notify us immediately at help@generalatlantic.com mailto:help@generalatlantic.com. Thank You.