I could be mistaken, but I know that ONTAP 7.2.4 adds logging for volume auto-resize events. I believe that it adds SNMP events as well, but I don't know that for certain.
-- Scott Lowe ePlus Technology, Inc.
________________________________________ From: owner-toasters@mathworks.com [owner-toasters@mathworks.com] On Behalf Of Daniel Keisling [daniel.keisling@austin.ppdi.com] Sent: Tuesday, February 26, 2008 1:50 PM To: Buerger, Andreas; toasters@mathworks.com Subject: RE: vol autoresize notification
I have the same problem because I have many thin-provisioned LUNs. You are correct in that there is no SNMP notification for autosize. I opened a ticket with NetApp and the reply was:
"First, if you have DFM, you can create a custom alert for notification. Second, you can create a custom trap using SNMP, and that would alert you as well.
There is some information on creating custom SNMP traps in the Network Management Guide, Chapter 5: http://now.netapp.com/NOW/knowledge/docs/ontap/rel723/html/ontap/nag/5sn mp7.htm
Unfortunately, I cannot assist you in actually creating a new trap, as that is something very much out of the scope of TSE's."
I have yet to create a custom trap, but please share if you get one working. I am currently monitoring my volumes by receiving SNMP alerts when the volume reaches 98%, letting me know the volume will autosize very soon.
Daniel
-----Original Message----- From: owner-toasters@mathworks.com [mailto:owner-toasters@mathworks.com] On Behalf Of Buerger, Andreas Sent: Tuesday, February 26, 2008 11:10 AM To: toasters@mathworks.com Subject: vol autoresize notification
Hi,
We're in progress to configure vol autoresizing on some of our systems. One central aspect of this configuration should be to get an information about the processed autoresizing action, to track what's going on on the affected volume. At the moment I see the only possibilty to get the threshold information of neary full and full volumes (by default 95% & 98%). By default, I just see the log on the console and so in /etc/messages, but non is send via snmp etc.
Is it possible to monitor the autoresizing action or is there a way to implement a notfication for autoresizing?
I'm thinking of user defined traps or something like that. Has anyone experiences with implementing vol autoresize?
Cheers Andreas
-- Wincor Nixdorf International GmbH Sitz der Gesellschaft: Paderborn Registergericht Paderborn HRB 3507 Geschäftsführer: Eckard Heidloff (Vorsitzender), Stefan Auerbach, Dr. Jürgen Wunram Vorsitzender des Aufsichtsrats: Karl-Heinz Stiller Steuernummer: 339/5884/0020 - Ust-ID Nr.: DE812927716 - WEEE-Reg.-Nr. DE44477193
Diese E-Mail enthält vertrauliche Informationen. Wenn Sie nicht der richtige Adressat sind oder diese E-Mail irrtümlich erhalten haben, informieren Sie bitte sofort den Absender und vernichten Sie diese E-Mail. Das unerlaubte Kopieren sowie die unbefugte Weitergabe dieser E-Mail ist nicht gestattet.
This e-mail may contain confidential information. If you are not the intended recipient (or have received this e-mail in error) please notify the sender immediately and destroy this e-mail. Any unauthorised copying, disclosure or distribution of the material in this e-mail is strictly forbidden.
______________________________________________________________________ This email transmission and any documents, files or previous email messages attached to it may contain information that is confidential or legally privileged. If you are not the intended recipient or a person responsible for delivering this transmission to the intended recipient, you are hereby notified that you must not read this transmission and that any disclosure, copying, printing, distribution or use of this transmission is strictly prohibited. If you have received this transmission in error, please immediately notify the sender by telephone or return email and delete the original transmission and its attachments without reading or saving in any manner.