You can reassign them without maintenance mode in diag privilege level.
disk assign disk_id -s unowned first, then just assign as usual.
Best regards Marcel
Gesendet von Outlook-Mail für Windows 10
Von: tmacmailto:tmacmd@gmail.com Gesendet: Freitag, 26. Februar 2016 13:14 An: Mark Flintmailto:mf1@sanger.ac.uk Cc: toasters@teaparty.netmailto:toasters@teaparty.net Betreff: Re: 3170 issue
Worst case, you may need to head in to maintenance mode and issue the disk reassign command there. Been a while and I do not remember if any version of ONTAP will let you reassign foreign disks without heading to main mode
--tmac
Tim McCarthy Principal Consultant
On Fri, Feb 26, 2016 at 7:10 AM, Mark Flint <mf1@sanger.ac.ukmailto:mf1@sanger.ac.uk> wrote: Thanks to Andrei and Tim et al, I’ve found the little blighters. Now I just need to reassign 112 disks :)
~Mark
From: tmac <tmacmd@gmail.commailto:tmacmd@gmail.com> Date: Friday, 26 February 2016 at 11:56 To: Mark Flint <mf1@sanger.ac.ukmailto:mf1@sanger.ac.uk> Cc: "andrei.borzenkov@ts.fujitsu.commailto:andrei.borzenkov@ts.fujitsu.com" <andrei.borzenkov@ts.fujitsu.commailto:andrei.borzenkov@ts.fujitsu.com>, "toasters@teaparty.netmailto:toasters@teaparty.net" <toasters@teaparty.netmailto:toasters@teaparty.net> Subject: Re: 3170 issue
Now, carefully look at that list! In a HA environment, there should be only two IDs listed for owners. Of course, only one number for a single controller.
If you have more than the expected number, then that is why they are not showing. Why not post the "disk show -v" to the list so we can see?
--tmac
Tim McCarthy Principal Consultant
On Fri, Feb 26, 2016 at 6:48 AM, Mark Flint <mf1@sanger.ac.ukmailto:mf1@sanger.ac.uk> wrote: Apologies, I replied directly to the people who’d suggested it. Have run disk show –v, and yes, it shows all 350 disks. As does environment status shelf……….
Thanks,
Mark
From: "andrei.borzenkov@ts.fujitsu.commailto:andrei.borzenkov@ts.fujitsu.com" <andrei.borzenkov@ts.fujitsu.commailto:andrei.borzenkov@ts.fujitsu.com> Date: Friday, 26 February 2016 at 10:34 To: Mark Flint <mf1@sanger.ac.ukmailto:mf1@sanger.ac.uk>, Brad Thompson <brad.thompson877@gmail.commailto:brad.thompson877@gmail.com> Cc: "toasters@teaparty.netmailto:toasters@teaparty.net" <toasters@teaparty.netmailto:toasters@teaparty.net> Subject: RE: 3170 issue
“unowned” is not the same as “not owned by current controller”. Other disks are owned by some other controller, so they are not shown by “disk show -n”. Any reason you won’t use “disk show -v” as suggested twice already?
--- With best regards
Andrei Borzenkov Senior system engineer FTS WEMEAI RUC RU SC TMS FOS [cid:image001.gif@01CBF835.B3FEDA90] FUJITSU Zemlyanoy Val Street, 9, 105 064 Moscow, Russian Federation Tel.: +7 495 730 62 20tel:%2B7%20495%20730%2062%2020 ( reception) Mob.: +7 916 678 7208tel:%2B7%20916%20678%207208 Fax: +7 495 730 62 14tel:%2B7%20495%20730%2062%2014 E-mail: Andrei.Borzenkov@ts.fujitsu.commailto:Andrei.Borzenkov@ts.fujitsu.com Web: ru.fujitsu.comhttp://ts.fujitsu.com/ Company details: ts.fujitsu.com/imprinthttp://ts.fujitsu.com/imprint.html This communication contains information that is confidential, proprietary in nature and/or privileged. It is for the exclusive use of the intended recipient(s). If you are not the intended recipient(s) or the person responsible for delivering it to the intended recipient(s), please note that any form of dissemination, distribution or copying of this communication is strictly prohibited and may be unlawful. If you have received this communication in error, please immediately notify the sender and delete the original communication. Thank you for your cooperation. Please be advised that neither Fujitsu, its affiliates, its employees or agents accept liability for any errors, omissions or damages caused by delays of receipt or by any virus infection in this message or its attachments, or which may otherwise arise as a result of this e-mail transmission.
From:toasters-bounces@teaparty.netmailto:toasters-bounces@teaparty.net [mailto:toasters-bounces@teaparty.net] On Behalf Of Mark Flint Sent: Friday, February 26, 2016 1:16 PM To: Brad Thompson Cc: toasters@teaparty.netmailto:toasters@teaparty.net Subject: Re: 3170 issue
It appears not, the disk show –n command brings nothing back.
:(
`Mark
From: Brad Thompson <brad.thompson877@gmail.commailto:brad.thompson877@gmail.com> Date: Friday, 26 February 2016 at 09:15 To: Mark Flint <mf1@sanger.ac.ukmailto:mf1@sanger.ac.uk> Cc: "toasters@teaparty.netmailto:toasters@teaparty.net" <toasters@teaparty.netmailto:toasters@teaparty.net> Subject: Re: 3170 issue
Do you have unassigned disks? The "disk show" command will only show the disks that are assigned. If there are unassigned disks you would see a note at the bottom of that output stating how many disks are unowned. You can also see those unowned disks by using "disk show -n". "disk show -v" will show you all of the disks, including those that are not assigned.
On Fri, Feb 26, 2016 at 4:00 AM, Mark Flint <mf1@sanger.ac.ukmailto:mf1@sanger.ac.uk> wrote: Hi all, I have a 3170 FAS, with 25 shelves of 1TB disk , 14 per shelf. I use the command storage show disk, and see al 350 disks, yet if I use the command disk show, I see one 242. Can anyone suggest what may be causing the difference in output?
Thanks,
Mark
Sent from my iPhone
_______________________________________________ Toasters mailing list Toasters@teaparty.netmailto:Toasters@teaparty.net http://www.teaparty.net/mailman/listinfo/toasters
_______________________________________________ Toasters mailing list Toasters@teaparty.netmailto:Toasters@teaparty.net http://www.teaparty.net/mailman/listinfo/toasters
________________________________
This message is for the designated recipient only and may contain privileged, proprietary, or otherwise private information. If you have received it in error, please notify the sender immediately and delete the original. Any other use of the email by you is prohibited.
