No part numbers on them, I did also check. You can just see the SFP manufacturer + model in the sysconfig -a output, but that's about it - no indication of whether they're compatible with what card or something like this.
Support is working through the new CA output now and will update me if on the SAS cabling issue afterwards, all other warnings in CA 3.5 are just related to firmware (new one got released) and port mismatch which is to be expected at the moment since I'm running an asymmetric configuration right now.
Best,
Alexander Griesser System-Administrator
ANEXIA Internetdienstleistungs GmbH
Telefon: +43-5-0556-320 Telefax: +43-5-0556-500
E-Mail: ag@anexia.at Web: http://www.anexia.at
Anschrift Hauptsitz Klagenfurt: Feldkirchnerstraße 140, 9020 Klagenfurt Geschäftsführer: Alexander Windbichler Firmenbuch: FN 289918a | Gerichtsstand: Klagenfurt | UID-Nummer: AT U63216601
-----Ursprüngliche Nachricht----- Von: Borzenkov, Andrei [mailto:andrei.borzenkov@ts.fujitsu.com] Gesendet: Dienstag, 17. Juni 2014 07:16 An: Alexander Griesser; Duncan Cummings Cc: Toasters Betreff: RE: FCP Ports operational down
Gotta find out what the problem with the SAS cables is now, but the FC topic has been solved by just switching ports. The problem was an incompatibility with the FC SFPs I got and the UTA extension card, they do not > work together and have to be deployed in the onboard UTA ports.
Yes, PCIe card and on-board ports use different SFP. I wish HWU also displayed original manufacturer model, because for all I can tell there are no NetApp part numbers on them (at least in the past, may have changed today).
Nice you have this sorted out.