You should talk to NetApp support if you are having a problem with this.
However, there is nothing to do on the filer. If the autoloader is correctly configured, then using the urst0a device name will cause autoloading to occur. See the manpage for na_tape.4 for more detail.
Regards, Andrew
-----Original Message----- From: owner-dl-toasters@netapp.com [mailto:owner-dl-toasters@netapp.com]On Behalf Of bhaskar.g@philips.com Sent: 19 April 2000 05:31 To: toasters@mathworks.com Subject:
Hi All,
We have a Filer 720 with two shelves. We are having a DLT 7000 Autoloader ( Dell Powervault 120T ) for the backup of the filer. Please let me know how to enable the autoloading option 'ON' on the filer.
regards Bhaskar G Systems Engineer, Philips Semiconductors, #3, Sterling Square,Madras Bank Road, Off St Mark's Road,BANGALORE-560 001. Voice : +91 80 222 9200 Ext 1478 Fax: +91 80 2229700