Alright – with regards to Chris‘ question: I did assume that a0a currently is not LACP or connected to a different set of switches, which is probably the reason, why you cannot just add the physical ports in a0b to the existing ifgrp a0a, right?
Alexander Griesser Head of Systems Operations
ANEXIA Internetdienstleistungs GmbH
E-Mail: AGriesser@anexia-it.commailto:AGriesser@anexia-it.com Web: http://www.anexia-it.comhttp://www.anexia-it.com/
Anschrift Hauptsitz Klagenfurt: Feldkirchnerstraße 140, 9020 Klagenfurt Geschäftsführer: Alexander Windbichler Firmenbuch: FN 289918a | Gerichtsstand: Klagenfurt | UID-Nummer: AT U63216601
From: Yuvaraja Shivaram yuvaraja.kishan@gmail.com Sent: Friday, March 8, 2019 11:48 AM To: Alexander Griesser AGriesser@anexia-it.com Subject: Re: please provide the complete steps for creating new lacp ports..
Thanks a lot Alexander for your update, since it is prod, i do not want to take any risk...
will send you the complete step before monday(may be tommorrow), let me know if i am missing anything in that..
Regards Yuvaraja
On Fri, Mar 8, 2019 at 4:08 PM Alexander Griesser <AGriesser@anexia-it.commailto:AGriesser@anexia-it.com> wrote: CDOT is non disruptive with most network operations, so you could either migrate all LIFs off from one physical node to the other one, reconfigure the interface group on node A then to be LACP with the new ports and move the LIFs back then, if what you’re trying to achieve is a seamless migration of your services to different physical ports with a different aggregation method.
You can use the same VLAN on both physical interfaces, of course – no problem and it won’t affect the availability of the first tagged interface on a0a.
Alexander Griesser Head of Systems Operations
ANEXIA Internetdienstleistungs GmbH
E-Mail: AGriesser@anexia-it.commailto:AGriesser@anexia-it.com Web: http://www.anexia-it.comhttp://www.anexia-it.com/
Anschrift Hauptsitz Klagenfurt: Feldkirchnerstraße 140, 9020 Klagenfurt Geschäftsführer: Alexander Windbichler Firmenbuch: FN 289918a | Gerichtsstand: Klagenfurt | UID-Nummer: AT U63216601
From: Yuvaraja Shivaram <yuvaraja.kishan@gmail.commailto:yuvaraja.kishan@gmail.com> Sent: Friday, March 8, 2019 11:36 AM To: Alexander Griesser <AGriesser@anexia-it.commailto:AGriesser@anexia-it.com> Cc: toasters <toasters@teaparty.netmailto:toasters@teaparty.net> Subject: Re: please provide the complete steps for creating new lacp ports..
very good question...Alexander,
earlier we were using only 2 ports, leaving other 2 ports keeping idle, so we are configuring other 2 ports and configuring LACP out of it,,,as of now do not have any plan to use any other vlan id's other than 608, ,which is already functional in the interface group as a0a, so now that same vlan id can be used for the new interface group a0b...? will that create any outage (since i am not getting vlan add..options similar to 7mode)...
Regards Raj,
On Fri, Mar 8, 2019 at 3:54 PM Alexander Griesser <AGriesser@anexia-it.commailto:AGriesser@anexia-it.com> wrote: Hey,
why do you want to have the same VLAN on two different interface groups?
Alexander Griesser Head of Systems Operations
ANEXIA Internetdienstleistungs GmbH
E-Mail: AGriesser@anexia-it.commailto:AGriesser@anexia-it.com Web: http://www.anexia-it.comhttp://www.anexia-it.com/
Anschrift Hauptsitz Klagenfurt: Feldkirchnerstraße 140, 9020 Klagenfurt Geschäftsführer: Alexander Windbichler Firmenbuch: FN 289918a | Gerichtsstand: Klagenfurt | UID-Nummer: AT U63216601
From: toasters-bounces@teaparty.netmailto:toasters-bounces@teaparty.net <toasters-bounces@teaparty.netmailto:toasters-bounces@teaparty.net> On Behalf Of Yuvaraja Shivaram Sent: Friday, March 8, 2019 11:22 AM To: toasters <toasters@teaparty.netmailto:toasters@teaparty.net> Subject: please provide the complete steps for creating new lacp ports..
Hi All,
Is there any way to add vlan to existing vlan-id, just how we do at 7mode...
curretly we are using 9.4p1 cmode....
below vlan already exists....so now if i want to create a0b for the same vlan id 608, am not getting vlan add here, so..
if i use ,network port vlan create -node cluster-01 -vlan-name a0b-608... is there any outage to this id 608, which is already running in production...?
Network Network Node VLAN Name Port VLAN ID MAC Address ------ --------- ------- -------- ----------------- cluster-01 a0a-608 a0a 608 xxxx cluster-02 a0a-608 a0a 608 xxxx