Re: Converting Netcache to Filer

Hi all,

I have replace the HS battery, now the system is ok, but after each initialize all disk the server tell me that i must enter a valid license. As if the server do not reconize my valid license for NFS or CIFS !!! but if I enter a license for netcache, the system valid it but the installation is a netcache system !!!

Someone can help me about it ? Maybe jumper on motherboard ??

Thanks, Laurent.

----- Original Message ----- From: "masterlolo" masterlolo@noos.fr To: toasters@mathworks.com Sent: Saturday, September 18, 2004 11:51 AM Subject: Re: Converting Netcache to Filer

Hi all,

I have unset netcache by this command : ok unsetenv netcache ok setenv netcache? false

I have check environnement : ok printenv Variable Name Value Default Value netcache? false

That's ok at this point. I boot on DATA ONTAP Diskettes, and choose " (4) Initialize all disks " at the menu : Zero disks and install a new file system? y This will erase all the data on the disks, are you sure? y Zeroing disks takes about 15 minutes.....

I enter some configuration information (as hostname, ip...) & i am stopped by " Please enter your license: " I have tested to enter a valid license for nfs, cifs : " You must enter a valid system license " I have tested to enter a valid license for netcache : that's ok (but after

I

have a system problem : low battery and the system shutdown !) So I would like to know if it's right to enter netcache license to convert netcache in filer ?? Do must change the netcache firmware to filer firmware ??

Thanks for your help, Laurent.