I would take it even farther to this level,
Why can't we transfer the licenses that we paid for and have maintained on support to a replacement filer when we retire an asset???? Well other than the obvious.
This is my biggest hang up. It is very frustrating that I have to chuck hundreds of thousands of dollars in SnapMirror, SnapRestore, CIFS and NFS licenses because NetApp decided that my platform will not be supported anymore.
----- Original Message ---- From: "Darragh, Stephen J (CSC) (US SSA)" stephen.j.darragh@baesystems.com To: toasters@mathworks.com Sent: Tuesday, April 22, 2008 10:54:49 AM Subject: RE: Licensing Question
Hello,
Why wouldn't you allow the software to move with the hardware even if its not the original owner?
I am sure you have valid reasons and it would be nice if you could convey those to all these people who use your product.
Thank you Stephen Darragh
-----Original Message----- From: owner-toasters@mathworks.com [mailto:owner-toasters@mathworks.com] On Behalf Of Warmenhoven, Dan Sent: Monday, April 21, 2008 10:14 PM To: Kryder, Andy Cc: ScottUCE@aol.com; toasters@mathworks.com; voiperster@gmail.com; Roach, Steven Subject: RE: Licensing Question
Hi Andy,
As General Council, would you please ensure that none of our software licenses are transferable, and if any have been transferred illegally that the people responsible are dealt with in a appropriate manner.
Thanks
Dan
From: ScottUCE@aol.com [mailto:ScottUCE@aol.com] Sent: Monday, April 21, 2008 7:02 PM To: Warmenhoven, Dan; Roach, Steven; voiperster@gmail.com; toasters@mathworks.com Subject: Re: Licensing Question
Union Computer has been selling discounted and used NetApp systems and add-ons, including filers with transferable software licenses, for over ten years.
Of the nearly 300 companies to whom we have sold NetApp hardware during this time, dozens have been purchasing used filers for which Network Appliance, Inc. is obligated to transfer the software licenses -- free of charge.
Nonetheless, it is true that most NetApp filers’ licenses cannot be transferred to new users; as such, many of these units will sit in our warehouse until they can be sold for parts, maintenance sparing, testing and backup.
Scott
Scott Fischmann Union Computer Exchange, Inc. 7600 West 27th Street Building B1 Minneapolis, Minnesota 55426 scott@unioncomputer.com 952.935.7282 - Office 952.240.6835 - Mobile (urgent calls only)
"Helping our customers make each dollar go further - since 1991!"
In a message dated 4/21/2008 7:51:00 PM Central Daylight Time, Dan.Warmenhoven@netapp.com writes: None of NetApp's software licenses are transferable, and they never have been in my 14 years as CEO.
Dan
Dan Warmenhoven Chairman & CEO NetApp, Inc. 1-408-822-6600 Direct dan@netapp.com www.netapp.com
From: ScottUCE@aol.com [mailto:ScottUCE@aol.com] Sent: Monday, April 21, 2008 4:29 PM To: Roach, Steven; voiperster@gmail.com Cc: toasters@mathworks.com Subject: Re: Licensing Question
Peter:
Some used NetApp filers DO have transferable ONTAP licenses. We have been providing them for many years and would be happy to answer any questions you might have.
Scott
Scott Fischmann Union Computer Exchange, Inc. 7600 West 27th Street Building B1 Minneapolis, Minnesota 55426 scott@unioncomputer.com 952.935.7282 - Office 952.240.6835 - Mobile (urgent calls only)
"Helping our customers make each dollar go further - since 1991!"
In a message dated 4/21/2008 9:27:37 AM Central Daylight Time, Steven.Roach@netapp.com writes: Peter,
If all you wanted was access via FCP that is the only license you would need, a software subscription also would be needed so you can download the Data OnTap.
A hardware subscription would not be a bad idea. Not sure how much the cost is, I would certainly have a conversation with your local NetApp Sales guy or a Channel Sales rep.
On 4/20/08 10:33 PM, "Peter Rosenthal" voiperster@gmail.com wrote:
Thanks Steven,
Is the FCP license all that is required or is there some sort of base license. Any ballpark figure on the license cost?
Thanks.
2008/4/21 Roach, Steven Steven.Roach@netapp.com:
Hey Peter,
Resetting a password is very easy, During the boot hit Control + C to enter in to Special Menu and one of the options there will allow to you to reset the password.
Licenses are a whole other story. Licenses do not transfer with Used equipment. If you buy a used FAS270 will have to buy an "FCP" license to access it over Fibre Channel.
From: Peter Rosenthal [mailto:voiperster@gmail.com] Sent: Sun 4/20/2008 6:36 PM To: toasters@mathworks.com Subject: Licensing Question
Hello,
We are considering getting some used netapps equipment. I am mostly concerned with the pitfalls of licensing and would be grateful for any pointers.
Specifically we are currently looking at a FAS270. We want to connect it via fibre channel to a FC switch and then two FC HBAs on different hosts. I do not want to end up with a door stop product and therefore I would like to know if:
Will I have any problems resetting any existing passwords that might exist on the filer? Is the license required to access the filer via fibre channel optional or will any licensed filer support it?
Thanks.
NetApp Steve Roach Mobile (215)237-1660 Support (888)463-8277
Need a new ride? Check out the largest site for U.S. used car listings at AOL Autos.
Need a new ride? Check out the largest site for U.S. used car listings at AOL Autos.
____________________________________________________________________________________ Be a better friend, newshound, and know-it-all with Yahoo! Mobile. Try it now. http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ
