If you fail the a0a over to another node, making sure auto fall back is disabled, then destroy the a0a on the node, halt it, remove the 10g card, replace with the 40g card and recreate a0a with its vlans. Then you should be able to fall back.
Spelling errors courtesy of Swype for iOS...
Tim McCarthy, Consultant at Presidio ________________________________ From: toasters-bounces@teaparty.net toasters-bounces@teaparty.net on behalf of Alexander Griesser AGriesser@anexia-it.com Sent: Tuesday, April 18, 2017 6:50:31 AM To: toasters@teaparty.net Subject: Add new ports to interface groups
Hey there,
I’m currently thinking about upgrading some of my filers from 10G to 40G interfaces. This would involve pulling out the 10G card and inserting the 40G card, so one halt per node is necessary, which isn’t really the problem. I’m just a bit unsure of the best way to move my a0a ifgrp to the new ports – I remember that in the past when you wanted to switch the ifgrp to a different portspeed, you had to recreate it completely which is a bit cumbersome due to all the VLANs built on top of it – has that changed?
If I issue a takeover of the first system and replace the card, it will probably boot up with a broken ifgrp configuration since it cannot find the physical ports in the ifgrp anymore and I’m looking for the best way to do a physical port upgrade like this now, so if anyone has gone through that already, feedback would be greatly appreciated.
Best,
Alexander Griesser Head of Systems Operations
ANEXIA Internetdienstleistungs GmbH
E-Mail: AGriesser@anexia-it.commailto:AGriesser@anexia-it.com Web: http://www.anexia-it.comhttp://www.anexia-it.com/
Anschrift Hauptsitz Klagenfurt: Feldkirchnerstraße 140, 9020 Klagenfurt Geschäftsführer: Alexander Windbichler Firmenbuch: FN 289918a | Gerichtsstand: Klagenfurt | UID-Nummer: AT U63216601